SH-1516D PTC FAN HEATER
IMPORTANT INSTRUCTIONS PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances,basic precautions should always be followed to reduce the risk of fire,electric shock,and injury to persons,including the following: 1. Read all instructions before using heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. If provided, always use handles when moving this heater.
12. To disconnect the heater, first turn controls to off, then remove plug from outlet. Never pull by the cord. 13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. 14. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surface, like a bed, where openings may become blocked. 15. A heater has hot and arcing or sparking parts inside.
REMOTE CONTROL Up Button ON/OFF Button Down Button Timer Button Mode Button Swing Button BATTERIES INSTRUCTIONS (included) 1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the direction of Arrow B at the same time. 2. Use 1 "CR2032" lithium battery (included) 3. Insert the batteries, making sure that the positive terminals are facing the proper way. 4. Replace the cover. Battery installation Pull Notch B A B Locking latch BATTERY WARNING 1.
OPERATING INSTRUCTION Check before turning on the machine 1. Check if the power wire is under good condition. 2. The product adopts 120V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe grounding device, otherwise, please replace it with the qualified socket. Vertical and horizontal This unit can be used BOTH standing up or laying flat on its side depending on the user’s liking.
Memory function When the unit is restarted after normal shut down, it will start with the very latest setting prior to shut down. If powered off completely after a period of time, the unit will be reset back to factory default of high gear start and 95°F. Off screen function While in operation, the display screen will automatically turn off after 1 minute of inactivity, only keeping the heating logo lit. You can turn the display screen back on by holding the “+” and “-“ button for 2 secs.
MAIN TECHNOLOGY SPECIFICATIONS Power supply: AC 120V ~ 60Hz MODEL SH-1516D POWER REGULATION RANGE (W) LOW HIGH 900 LOW OSC HIGH OSC 900 1500 1500 Troubleshooting Before contacting the manufacturer, the following are solutions to common problems. However, if the solutions below do not solve the issue, it is recommended to contact the manufacturer’s customer service for further assistance. Problem Possible Cause The plug may not be After the power is engaged,the machine does plugged well. not work.
7