Owner's Manual

4
OPERATING INSTRUCTIONS
NOTE: this is an ULTRASONIC COOL MIST humidifier. The mist is cool. There is no steaming or boiling of
water.
1. Place unit on a smooth level surface that can support the unit when filled with water.
2. Make sure the unit is unplugged and in the off position.
3. Remove the adjustable misting outlet.
4. Lift the water tank and turn upside down.
5. Unscrew cap from water tank by turning the cap counterclockwise.
6. Fill with COOL tap water or DISTILLED water up to the max fill line. Do not overfill.
NOTE:
• DO NOT use hot water
• DO NOT add fragrance or oil in the water – it will cause malfunction of the unit!
• DO NOT pour water into the misting outlet.
• When carrying a filled water tank, place one hand under for support.
7. Screw the cap back on by turning cap clockwise. Do not over tighten.
8. Turn the water tank right-side up and carefully place the water tank onto the base, be sure tank is correctly
aligned with base and there is no gap between the tank and base.
NOTE: DO NOT attempt to move the humidifier while water tank is in place. Doing so may cause leakage of
water. Also, do not place humidifier on the floor. Place humidifier on an elevated, lint-free, waterproof, level
surface for best performance.