PORTABLE AIR CONDITIONER WITH HEATER WA-9061H: 9,000 BTU WA-1061H: 10,000BTU ☆ Read and retain these instructions for future reference
SPECIFICATION · Model no. WA-9061H WA-1061H Cooling capacity 9000 BTU/hr 2637 W 10000 BTU/hr 2930 W Heating capacity 8500 BTU/hr 2491 watts 9500 BTU/hr 2783 watts 9.93 906W / 8.3 A 840W / 7.75 A 3 375m /h 9.35 1070W / 8.7 A 950W / 8.18 A 3 375m /h 1 L/hr 1 L/hr EER Power/Ampere consumption – Cooling* Power/Ampere consumption – Heating* Air volume (max. speed) Humidity removal capacity Power supply Compressor Recommended room size Refrigerant Fan speed Timer 115V~, 60Hz/1phase rotary 250 sq.ft.
BEFORE USE GENERAL SAFETY • Only use in the upright position on a flat level surface and at least 14in. from any walls or objects (fig 1 & 4). • Do not place any objects on the unit or block the FIG. 1 air inlet / outlet (fig. 2). • Closely supervise children and pets when unit is in use. ELECTRICAL SAFETY • For indoor household use only. • Switch off and unplug when not in use. FIG.2 • Do not use in humid or wet environments. (fig 3) • Do not pull the UNIT by the cord.
PARTS Front Back FIG.5 1. 2. 3. 4. 5. FIG.6 Display window Control panel Air outlet Carrying handle Caster 6. 7. 8. 9. 10. 11. Cord storage Air filter Air inlet Exhaust air outlet Air inlet Water stopper/drainage Accessories FIG.7 13. Exhaust hose 16. Plastic slider kit – piece 2 of 2 14. Slider kit adapter – connects exhaust hose 17. Drain tube to slider kit. 18. Active carbon filter 15. Plastic slider kit – piece 1 of 2 19.
INSTALLATION The unit is a portable air conditioner that may be moved from room to room. 1. Installing the plastic slider kit. Window kit FIG.8 Extend both ends of the exhaust hose by few inches. Connect hose to the back of unit by turning clockwise – do not over tighten. Connect adapter piece to hose by turning clockwise (with opening end facing you). Determine how many sections of the slider kit your window requires.
Carbon Filter Installation 1. Remove filter frame from unit. 2. Remove the filter fixer from the filter frame. 3. Remove active carbon filter from plastic bag. 4. Insert active carbon filter to filter frame. 5. Replace filter fixer to frame. The active carbon filter is now held in between the filter frame and filter fixer. 6. Replace filter frame to unit.
OPERATION Control panel 1. 2. 3. 4. 5. 6. 7. 8. 9. Mode (function) select button Timer button “Water Full” indicator Sleep button Fan speed button Low fan speed indicator High fan speed indicator Receiver for remote control Sleep operation indicator 10. 11. 12. 13. 14. 15. 16. 17. 18.
Setting fan speed 1. Press SPEED button to choose the desired fan speed, high or low. The corresponding indicator (HI or LOW) will illuminate. 2. If the unit is operating in AUTO mode, the SPEED button is invalid. Unit will automatically choose the fan speed based on the ambient temperature. Setting timer 1. If unit is in operation, pressing the TIMER button will set the operating hours (from 1 to 12 hours). Once the set time has been reached, unit will turn off automatically.
Remote control All functions can also be performed with the supplied remote control. The remote control requires two (2) AAA batteries (not included) Fig.16 Directing air flow Manually adjust the louvers left & right or up & down to direct air flow. FIG. 17 NOTICE ! To prolong the life of the compressor, after powering off the unit, please wait at least 3 minutes before turning it back on.
DRAINAGE During the cooling process, some water will be extracted from the air into the unit. If the reservoir is full, both of the compressor (cooling) and motor (fan) will stop and unit will emit a Buzz (press any button to stop the buzz); the Water Full indicator will also be flashing. Before cooling can resume, empty the water tank: 1. Turn off the air conditioner and avoid moving it when full. 2. Position a container (a water tray for example) underneath the drain spout. 3.
MAINTENANCE Always unplug the air conditioner from power source before cleaning. Clean regularly to maximize the efficiency of the air conditioner. Cleaning the housing Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These products may blemish the cabinet.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • Sunpentown must be notified of the fault. • Proof of purchase must be presented to Sunpentown’s nominated representative. • The warranty will be void if the product if modified, misused or repaired by an unauthorized person.