Datasheet

ManualsBrandsSUNPOWER TECHNOLOGIES ManualsPSU ComponentsAC/DC PSU module 12 Vdc 8.5 A

Features:

Universal AC input with active Power Factor Correction

Built in EMI filter, low ripple noise

Over load, over voltage, short circuit protection

Over temperature protection (Optional)

Remote Control ON/OFF (Optional)

No minimum load requirement

100% 50°C burn-in test

1 year warranty

Specification:

MODEL

SPS-100P-

3.3

SPS-100P-

24O

SPS-100P-

24Q

SPS-100P-

Voltage 3.3V 5V 12V 15V 24V 27V 28V 48V

min. Load 0A 0A 0A 0A 0A 0A 0A 0A

max. Load 23A 20A 9.8A 7.84A 4.9A 3.7A 3.6A 2.1A

Tolerance ±3% ±2% ±1% ±1% ±1% ±1% ±1% ±1%

Ripple & Noise (max) 50mV 50mV 120mV 150mV 240mV 270mV 280mV 300mV

OUTPUT

Efficiency

(typ) 66% 74% 78% 78% 80% 80% 80% 82%

Max. Output Power 75W 100W 117W 117W 117W 100W 100W 100W

Output Voltage adjustment range ±10% of rated output voltage

Voltage 88 ~ 264VAC / 120 ~ 375VDC Universal full range, single phase

Frequency 47 ~ 63 Hz

Current 3A max at 100VAC input, full load condition

Inrush Current < 35A@115VAC / < 70A@230VAC input, full load condition. Cold start at 25°C ambient

Leakage Current < 1.5mA@264VAC input

INPUT

P.F.C. > 0.95@230VAC / meets IEC 1000-3-2 class A standard

Over Load > 105% ~ 180% of rating, Shutdown, recovers automatically after fault has been removed

Over Voltage 3.8 ~ 4.6V 5.8 ~ 7.0V 13.8~17.5V 17.3 ~ 21V 27.6~33.6V 31 ~ 37.8V 32.2~39.2V 55.2~67.2V

Over Temp. Optional

PROTECTION

Short Circuit Shutdown, recovers automatically after fault has been removed

Setup time < 300ms@230VAC / < 800ms@115VAC

Rise time < 20ms@230VAC

Holdup time > 80ms@230VAC / > 16.7ms@115VAC

Remote Control Optional

Cooling Natural Cooling

OTHERS

Withstand Voltage I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC / 1 minute

Switching Frequency 50KHz (fixed)

Temperature Operating: 0 ~ 70°C / Derating: 50°C ~ 70°C : 2.5%/°C / Storage: -10 ~ 75°C

Environment

Humidity Operating: 20% ~ 85% RH / Storage: 10% ~ 95% RH (non condensing)

M.T.B.F. > 270K hours ( according to MIL-HDBK-217F at 25°C environment)

SAFETY

Approved: UL 1950 / CSA C22.2 No.950-95 / TÜV EN60950 / IEC 60950 / EMKO-TSE (74-SEC)207/94

EMI FCC CFR 47 PART 15 CLASS B / EN 50081-1 / CNS 13438 CLASS B

EMC

EMS EN 50082-1 (1997) / EN61000-4-2,3,4,5,6,8,11

WEIGHT N.W.: 0.7 kg/pc

SPS 100P Sin

le 100W

Country of Origin : Taiwan

Operating Temperature : 0 ~ 70° C

Dimension : 198 x 95 x 38 mm

Approvals / Marks : UL, c-UL, TÜV, CB, CE

info / drawing : www.dehner.net/sps100p Specifications subject to change without notice

Summary of content (1 pages)

PAGE 1
SPS 100P Single Country of Origin : Taiwan Operating Temperature : 0 ~ 70° C Dimension : 198 x 95 x 38 mm Approvals / Marks : UL, c-UL, TÜV, CB, CE 100W Features: Universal AC input with active Power Factor Correction Built in EMI filter, low ripple noise Over load, over voltage, short circuit protection Over temperature protection (Optional) Remote Control ON/OFF (Optional) No minimum load requirement 100% 50°C burn-in test 1 year warranty Specification: MODEL OUTPUT Voltage min. Load max.