User's Manual

POWER ON
BATTERY COVER
Notice : For trouble shooting
If the presenter is not working :
1. Maybe the battery power is too low , please check your battery .
2. Maybe ID code was not matched ,please link ID.
(1)Make sure receiver connector plug into correct port. Receiver port should
plug into PC USB port. For the best efficiency, keep the receiver 30 cm distance with
Laser Presenter
(2).Laser Presenter press "Page up and Page Down" key for more than 3 second
after led glittering ,LinK OK finishing ,LED CUT OFF
CAUTION
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS II
LASER PRODUCT.
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED
EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN
INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS
SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN
BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS
DRIVING.
LED Lamp