Instructions / Assembly

-17- -18-
STEP 6-Safety placard Attachment
A. Using the tie wrap, attach the Safety Instruction Placard (7) to the trampoline. The tie
wrap should go around the Vertical Frame joint and the Top Rail to ensure that it
doesn't slide off the trampoline.
STEP 7-Frame Pad Assembly
A. Lay the Frame Pad (2)over the trampoline so that the springs and the steel frame is
covered.Please ensure that the Frame Pad covers all metal parts.
B. Tie the strap located at the under side of the frame pad to the frame.
C. Select your Pad model.
CARE AND MAINTENANCE
WARNING
This trampoline was designed and manufactured with quality materials and craftsmanship.
If proper care and maintenance is provided,it will provide all jumpers with years of exercise,
fun, and enjoyment as well as reduce the risk of injury. Please follow the guidelines listed
below:
This trampoline is designed to withhold a certain amount of weight and use. Please make
sure that only one person at any one time uses the trampoline. Also,the person should
weigh less than 300 pounds. Jumpers should either wear socks, gymnastics shoes,or be
barefoot when using the trampoline. Please be aware that street shoes or tennis shoes
should NOT be worn while. using the trampoline. In order to prevent the trampoline mat
from getting cut or damaged please do not allow any pets onto the mat. Also, jumpers
should remove all sharp objects from their person prior to using the trampoline. Any type of
sharp or pointed objects should be kept off the trampoline mat at all times.
Always inspect the trampoline before each use for worn, abused or missing parts. A
number of conditions could arise that may increase your chances of getting injured. Please
be aware of:
Punctures, holes, or tears in the trampoline mat
Sagging trampoline mat
Loose stitching or any kind of deterioration of the mat
Bent or broken frame parts. such as the legs
Broken, missing, or damaged springs
Damaged, missing, or insecurely attached frame pad
Protrusions of any types (especially sharp types) on the frame, springs, or mat
IF YOU FIND ANY OF THE PREVIOUS CONDITIONS, OR ANYTHING ELSE THAT YOU
FEEL COULD CAUSE HARM TO ANY USER, THE TRAMPOLINE SHOULD
BEDISASSEMBLED OR SECURED FROM USE UNTIL THE CONDITION(S) HAS BEEN
RESOLVED.
WINDY CONDITIONS
In severe wind situations,the trampoline can be blown about. If you expect windy weather
conditionsthe trampoline should be moved to a sheltered area or disassembled. Another
option is to tie the round,outside portion (top frame) of the trampoline to the ground using
ropes and stakes. To ensure security, at least three (3)tie downs should be used. Do not
just secure the legs of the trampoline to the ground because they can pull out the frame
sockets.
MOVING THE TRAMPOLINE
If you need to move the trampoline, two people should be used. All connector points should
be wrapped secured with weather resistant tape, such as duct tape. This will keep the
frame intact during the move and prevent the connector points from dislocating and
separating. When moving, lift the trampoline slightly of the ground and keep it horizontal to
the ground. For any type of other move, you should disassemble the trampoline.