Installation Guide

With assistance, place the table
top ① upside down on a soft,
level surface.
Attach the control panel ② to the
table top ① by first inserting the
tip of the valve into the end of the
injection pipe as illustrated.
Then install (2) M5x10 bolts ⑱ to Then install (2) M5x10 bolts ⑱ to
secure the control panel ② to the
table top ①.
Be certain the valve is properly
connected to the injection pipe
of burner, tighten two bolts as
Positon 1
Insert
Connect the earth wire as
position A.
Connect the thermocouple