User Manual sunrise surf & talk sunrise surf & talk verbindungen einrichten
sunrise surf & talk Welcome! sunrise surf & talk: surf the Internet, send and receive e-mails- and make phone calls also without a fixed network connection. It’s the new way of communicating. Suitable for anyone who wants to make calls and have cheap access to the Internet without a fixed network connection. From home or wherever you have access to the mobile network. Speed With mobile broadband from sunrise, surf the Internet with your PC or laptop at speeds up to six times that of ISDN.
sunrise surf & talk Flexible configuration The administrative interface is the central coordinating point from which to configure your sunrise surf & talk box. To access the administrative interface, all you need is a browser on your computer. It is not necessary to install any additional software. You can log in comfortably through the protected administrative interface and change the security settings for a WLAN or an IP address.
sunrise surf & talk 4 Table of Contents. Your sunrise surf & talk box. 6 Safety instructions 6 Included in delivery 6 LCD display 7 Control options and connections 7 Instructions for use 8 First Steps. 10 Setting up connections. 14 Setting up a WLAN connection 14 Setting up a LAN connection 21 Basics of administration.
sunrise surf & talk 5 Security settings in detail. 42 Basic firewall protection 42 Additional protection through encryption 43 Pro settings. 47 Changing a static IP address 47 Configuring the DHCP server 47 Configuring dynamic DNS 48 Configuring port forwarding 49 Selecting a WLAN channel 49 Adjusting the WLAN output power 50 Diagnostic tools. 51 Status of the sunrise surf & talk box 51 Ping diagnosis 52 Troubleshooting – Administration interface. 53 Glossary.
sunrise surf & talk Your sunrise surf & talk box Your sunrise surf & talk box. Safety instructions. To avoid hurting yourself or doing damage to the electronic device, please keep the following tips in mind when installing and using the sunrise surf & talk box. • The sunrise surf & talk box is a mobile electronic device, and is only intended for use in heated, dry, and dustfree spaces. The device may not be mounted or placed in a location subject to direct sunlight or the effects of heat.
sunrise surf & talk Your sunrise surf & talk box LCD display. 9 10 3 7 1. Barometer – shows the current weather situation: sunny, overcast and rainy 2. Current time – displayed in 24-hour format 3. Current date in the format: DD.MM.YYYY 2 8 1 4. Status indicator for the local network connection to the computer: WLAN or LAN 6 4 5. Status indicator for the availability and type of network: U, E or G (U=UMTS, E=EDGE or G=GPRS) 5 6. Display of the current outgoing or incoming telephone number 7.
sunrise surf & talk Your sunrise surf & talk box Reset button The reset button is located in the small hole on the left of the telephone jack, when looking at the sunrise surf & talk box from above. Depending upon how long you press the reset button, you can initiate the following actions: • Restart the sunrise surf & talk box • Restore the factory settings, also see Restore factory settings (RESET), p. 30. 1 2 3 Buttons 1. This button is used to adjust the brightness of the display. 2.
sunrise surf & talk Your sunrise surf & talk box Administration interface The administration interface of the sunrise surf & talk box can be accessed either through the log-in link on the CD ROM, or with an Internet browser. The browser has to support JavaScript and CSS (e.g., Microsoft Internet Explorer version 5.5 or higher, or Mozilla Firefox). Note: Please make sure that JavaScript is activated in your browser program. DHCP server The sunrise surf & talk box is equipped with its own DHCP server.
sunrise surf & talk First steps First steps. Set up the sunrise surf & talk box at a suitable location, one that meets the following criteria: • The site should be dry and free of dust, and must not be exposed to direct sunlight. • If you want to connect the device with your computer via network cable, keep in mind that the maximum cable length is 100 m, and situate the device near your computer.
sunrise surf & talk First steps Step 3 – Connect to power supply. Be sure to use the original sunrise surf & talk box power cord. Other power cords may damage or destroy the device. If other power cords are used, sunrise does not assume responsibility for damages. First insert the small connector in the upper round slot in the sunrise surf & talk box, and then insert the larger connector in the power outlet. The device generally takes between 60–90 seconds to start up.
sunrise surf & talk First steps Step 5 – Register the network with Windows. You can find more detailed information in the chapter «Setting up connections», p. 14. Note: The first steps for Mac OS users are not described in this manual. Mac OS users should consult their Apple manual, or contact Apple directly. Step 6 – Connect to the Internet. When getting started, you will need the PIN for the sunrise surf & talk SIM card that you inserted into the device. The PIN can be found in the enclosed SIM letter.
sunrise surf & talk First steps SSID The SSID (Service Set Identifier) is a network identification code used by the device in a wireless network. You can choose this code on your computer, in order to connect with the device. SSID transmissions Normally, the device sends out its SSID to client computers to show availability. You can stop these transmissions, however, to further increase security. In this case, you have to enter the SSID manually at each client computer.
sunrise surf & talk Setting up connections Setting up connections. You can connect your PC/laptop to the sunrise surf & talk box using WLAN (wireless) or with a network cable.
sunrise surf & talk Setting up connections Step 1 – Configure WLAN connection. 1. Start your PC/laptop. 2. Click on the START button in the taskbar of your PC and choose Settings > Network Connections. The Network Connections dialogue is opened. 3. Right click on Wireless Network Connection and select Properties in the context menu. The Wireless Network Connection Properties dialogue is opened. 4. Make sure that on the General tab the Internet protocol (TCP/IP) box is checked. 5.
sunrise surf & talk Setting up connections Step 3 – Deactivate proxy server If you use a proxy server for access to the Internet, deactivate it. Note: As an example, the following describes the procedure for Microsoft Internet Explorer. If you use a different browser, please read the appropriate user documentation. 1. Start Internet Explorer. 2. Select Tools > Internet Options. The Internet Options dialogue is opened. 3. Click on the Connections tab. 4.
sunrise surf & talk Setting up connections Step 5 – Configure encryption for your computer 1. Click on the START button of the taskbar of your computer and select Settings > Network Connections. The Network Connections dialogue is opened. Wireless Network Connection and select Properties from the context menu. 2. Right-click on The Wireless Network Connection Properties dialogue is opened. 3. Click on the Wireless Networks tab. 4.
sunrise surf & talk Setting up connections Microsoft Windows 2000: Setting up a WLAN connection. In order to be able to use a WLAN connection between your PC/Laptop and the sunrise surf & talk box, the following steps are required: 1. Configure a WLAN connection 2. Establish a WLAN connection 3. Deactivate any proxy server 4. Configure encryption for the sunrise surf & talk box 5.
sunrise surf & talk Setting up connections 7. Highlight «sunrise surf & talk box» in the Profile area and click on the Connect button. You will be asked, if necessary, to restart your computer. Step 3 – Deactivate proxy server 1. Make sure that on the General tab the box for Internet Protocol (TCP/IP) is checked. 2. Highlight Internet protocol (TCP/IP) and click on the Properties button. The Internet Protocol (TCP/IP) Properties dialogue is opened. 3.
sunrise surf & talk Setting up connections Step 5 – Configure coding for your PC/laptop 1. Double-click on the D-Link AirPremier symbol in the taskbar of your computer. The D-Link AirPremier AG Utility dialogue is opened. 2. Click on the Environment Overview menu. 3. Highlight «sunrise surf & talk box» in the Profile area and click on the Properties button. The Configuration dialogue is opened. 4. Carry out the following settings in this dialogue: • Select «WPA-PSK» in the Authentication selection list.
sunrise surf & talk Setting up connections Setting up a LAN connection. In order to establish a LAN connection between your PC/laptop and the sunrise surf & talk box, you first have to connect them with a network cable (Ethernet cable). Depending on how you would like to connect your computer with the sunrise surf & talk box, you will need different network cables.
sunrise surf & talk Setting up connections 5. On the General tab, click on the Obtain an IP address automatically option field and then click on the OK button. 6. In the Local Area Connection Properties dialogue, click on the Close button. You will be asked, if necessary, to restart your computer. Step 3 – Deactivate proxy server If you use a proxy server to access the Internet, deactivate it. Note: As an example, the following describes the procedure for Microsoft Internet Explorer.
sunrise surf & talk Setting up connections Microsoft Windows 2000: Setting up a LAN connection. In order to be able to use a LAN connection between your PC/laptop and the sunrise surf & talk box, the following steps are required: 1. Connect network cable 2. Configure LAN connection 3. Deactivate any proxy server Step 1 – Connect network cable 1. Insert the network cable into the appropriate port on your computer. 2.
sunrise surf & talk 5. Deactivate the following box: • Automatically detect settings • Use a proxy server for your LAN. 6. In order to save this configuration, click on the OK button. 7. Close the Internet Options dialogue by clicking on the OK button. Now you can continue with Step 6 – Connect to the Internet, pg. 12.
sunrise surf & talk Basics of Administration Basics of Administration. The sunrise surf & talk box is configured and administered in the administration interface. No installation is required on your PC/laptop in order to be able to work with the administration interface. You only need a browser. Logging in and Logging out. This is how you log in to the administration interface of the sunrise surf & talk box 1. Start your browser. 2. Enter http://192.168.0.
sunrise surf & talk Basics of Administration Changing your password. The sunrise surf & talk box is delivered from the factory with the standard password «admin» for access to the administration interface. In order to prevent any unauthorized access to the device, you should change this password. For security reasons, it is also to be recommended that you change the password at regular intervals. This is how you change your password 1.
sunrise surf & talk Basics of Administration 5. Click on the OK button. The PIN is securely stored in the sunrise surf & talk box. You have to enter the PIN again after the following actions: • The SIM card inserted for sunrise surf & talk was exchanged. • You have changed the PIN of the SIM card inserted for sunrise surf & talk. • You have installed a new firmware. • The sunrise surf & talk box was reset to the factory settings. 6. To leave the administration interface, simply close your browser.
sunrise surf & talk Basics of Administration This is how you synchronize the time and date with the help of NTP 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2. Click on the Time tab in the Tools menu. 3. Enter the desired NTP server in the NTP Server field. 4. Click on the Change configuration button. 5. Click on the Request time button. A connection with the Internet will be automatically established. 6.
sunrise surf & talk Basics of Administration Configuring the APN (Access Point Name) You have access to the Internet via the APN of the sunrise surf & talk box. You can freely configure the APN. This is how you configure the APN 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2. Click on the APN tab in the UMTS/GPRS menu. 3. Enter the designation for the new access point name in the UMTS/GPRS APN (for sunrise: internet) field. 4.
sunrise surf & talk Basics of Administration Restarting the sunrise surf & talk box. This is how you restart the sunrise surf & talk box 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2. Click on the Restart tab in the Tools menu. 3. Click on the Restart button. 4. Confirm the following security query by clicking on the OK button. Restarting the sunrise surf & talk box takes about 60-90 seconds.
sunrise surf & talk Basics of Administration Switching the SIM card for sunrise surf & talk. Step 1 – Removing the old SIM card for sunrise surf & talk 1. If necessary, disconnect the Internet connection (i.e. the connection to the mobile broadband network from sunrise). 2. In order not to damage the sunrise surf & talk box while changing the SIM card for sunrise surf & talk, pull the power cable not only out of the wall outlet but also out of the device. 3.
sunrise surf & talk Basics of Administration Conducting the self-test. The sunrise surf & talk box will conduct a self-test, if desired. This test checks the major hardware and software components of the device. If problems are found, they are then described in the administration interface. This is how you conduct the self-test of the sunrise surf & talk box 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2.
sunrise surf & talk Phoning Phoning. The SIM card for sunrise surf & talk For the telephone functions, the sunrise surf & talk box requires the use of a sunrise surf & talk SIM card. If you wish to use the telephone functions, you must first activate the SIM card by entering your PIN. The PIN will be stored in the sunrise surf & talk box. If you replace the SIM card, you must enter the PIN for the new card when you insert it.
sunrise surf & talk Phoning Changing the PIN for the sunrise surf & talk SIM card Note: The PIN for the sunrise surf & talk SIM card can be changed only through the administrative interface of your sunrise surf & talk box. 1. Lift the telephone handset and wait for the dial tone. 2. Enter the key sequence # 9 9 # . 3. Enter the old PIN. key. 4. Press the 5. Enter the new PIN. This may be any four- to eight-digit number of your choice. 6. Press the key. 7.
sunrise surf & talk Phoning Call Forwarding. You can have all of your calls forwarded automatically to another line of your choice, either immediately (CF-unconditional), after 20 seconds (CF-20), if your line is busy (CF-busy), or if your sunrise surf & talk box is turned off (CF-unit off). The destination number you enter to activate call forwarding must not be a blocked number. Activating call forwarding 1. Lift the telephone handset and wait for the dial tone. 2.
sunrise surf & talk Phoning Deactivating call forwarding 1. Lift the telephone handset and wait for the dial tone. 2. Enter the key sequence for the call forwarding setting you wish to delete. Call forwarding type Key sequence for deactivation CF-unconditional # 2 1 # CF-20 # 6 1 # CF-busy # 8 7 # CF-unit off # 6 2 # deactivate all CF # 2 2 # 3. Wait for the confirmation tone. 4. Replace the handset. Call waiting, flash function.
sunrise surf & talk Phoning Terminating the original call 1. You hear the call waiting tone during a call. 2. If you wish to accept the incoming call, you have 30 seconds in which to terminate the first call by replacing the handset. 3. After the telephone rings, lift the handset again. Rejecting the incoming call 1. You hear the call waiting tone during a call. 2. If you do not wish to accept the incoming call, enter the key sequence heard during the remainder of the existing call. R 0 .
sunrise surf & talk Phoning Selectively terminating a call 1. Press the R key and wait for the dial tone. 2. Press the 1 key. The active connection is terminated. Note: To remind you of a connection that is still active, a ring signal will sound after you replace the handset (up to three times, for a maximum of 15 seconds). Three-way conference calling. After you have already established one connection, you would like to accept a second, incoming call and bring the caller into the conversation.
sunrise surf & talk Phoning Interconnecting 1. Press the R key and wait for the dial tone. 2. Press the 3 key. All parties are now connected. Terminating You can terminate the conference by replacing the handset. Caller identification. Incoming calls You can see the caller‘s number on the sunrise surf & talk box display. This feature works only if display of the caller’s number has not been blocked by the caller.
sunrise surf & talk Managing SMS messages Managing SMS messages. The sunrise surf & talk box contains an SMS management interface that enables you to: • get an overview of the SMS messages that you have sent and received • use an editor form to send SMS messages • use an address book form to record and store destination numbers SMS menu 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p.25). 2. Select the SMS menu.
sunrise surf & talk Managing SMS messages You can also write an SMS directly to a person listed in your number directory. Select the desired contact person by the appropriate radio button and press the «Send SMS» button. The telephone number will be transferred automatically into the »Number» form field on the «Write SMS» tab. Note: It is possible to transmit an SMS to more than one address, but a comma or semicolon must be inserted between the individual telephone numbers.
sunrise surf & talk Security settings in detail Security settings in detail. Basic firewall protection. Note: These basic security settings do not guarantee the security of the connection between the sunrise surf & talk box and your PC or laptop. This is true especially if you are using a WLAN connection (see Additional protection through encryption, p. 43).
sunrise surf & talk Security settings in detail To restrict outgoing services: 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out p.25). 2. Select the Firewall tab in the Security menu. 3. Next to Services, enable the Allow following outgoing services option. 4. Click the Add Service button. 5. In the Name, Type, Start Port and End Port fields describe the service you wish to enable. 6. Click the Save button. 7.
sunrise surf & talk Security settings in detail 5. Click the Generate Key button. Your pass phrase will be converted to hexadecimal form. The length of the key generated will vary according to the level of security. • WEP 64: 10 characters • WEP 128: 26 characters 6. Make a note of the key that is generated and click the OK button. The WLAN connection to the sunrise surf & talk box will be closed.
sunrise surf & talk Security settings in detail Changing the SSID The SSID (Service Set Identifier) is the sunrise surf & talk box’s WLAN network identifier. The SSID set by the manufacturer is “sunrise surf & talk box”. You should change the SSID in order to prevent confusion with other sunrise surf & talk boxes in your vicinity, which may be using the same SSID. By changing the SSID you will avoid becoming connected inadvertently with a neighboring sunrise surf & talk box. How to change the SSID 1.
sunrise surf & talk Security settings in detail Using address filters to control access Every PC or laptop connected to the sunrise surf & talk box via a WLAN or LAN has a globally unique MAC (Media Access Control) address. This address is assigned by the device‘s manufacturer. You can control which devices have access to your sunrise surf & talk box’s WLAN network by adding the MAC addresses of those devices to filter lists.
sunrise surf & talk Pro settings Pro settings. This section and the configuration options it describes are intended for network administrators. Changing a static IP address. You can change the static IP address of the sunrise surf & talk box, which is used for access over a LAN or WLAN. The manufacturer has set the IP address to 192.168.0.1. How to change the static IP address 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p.25). 2.
sunrise surf & talk Pro settings 3. Enter the desired IP addresses in the IP Address Range fields. 4. Click the OK button. The connection to the sunrise surf & talk box’s administrative interface will be interrupted. 5. Reenter the IP address in your browser’s address field. How to assign static IP addresses through the DHCP server 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p.25). 2. Select the Static Addresses tab in the DHCP Server menu. 3.
sunrise surf & talk Pro settings How to configure dynamic DNS 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p. 25). 2. Select the DynDNS tab in the Tools menu. 3. Enter your data in the Domain Name, Login and Password fields. 4. Click the Save button. 5. To leave the administrative interface, close your browser. Configuring port forwarding.
sunrise surf & talk Pro settings 5. To leave the administrative interface, close your browser. Adjusting the WLAN output power. By adjusting the WLAN output power, you can change the range of your WLAN network. How to adjust the WLAN output power 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p.25). 2. Select the Output Power tab in the WLAN menu. 3. Select the desired value from the Output Power list.
sunrise surf & talk Diagnostic Tools Diagnostic Tools. The sunrise surf & talk box includes a number of diagnostic tools you can use to check the status of the device and the Internet connection. Status of the sunrise surf & talk box. Here’s how to check the status of the sunrise surf & talk box: 1. Log on to the administration user interface of the sunrise surf & talk box (see Logging in and logging out, p. 25). 2. Select the Status menu.
sunrise surf & talk Diagnostic Tools Ping diagnosis. You can use ping diagnosis to determine whether your sunrise surf & talk box is connected to the Internet. Here’s how to do a ping test: 1. Log on to the administration user interface of the sunrise surf & talk box (see Logging in and logging out, p. 25). 2. Choose the Diagnose tab from the Tools menu. 3. Enter a URL in the Ping Target field (e.g., www.google.ch). 4. Click on the Do Ping Test button.
sunrise surf & talk Troubleshooting – Administration interface Troubleshooting – Administration interface. The measures listed in this section may help if you have problems accessing the administration interface of the sunrise surf & talk box. Note: The following procedures apply to Microsoft Windows XP (Service Pack 2). If you use a different operating system, please consult the user documentation provided by the manufacturer. What to do if you forget the IP address of the sunrise surf & talk box: 1.
sunrise surf & talk Troubleshooting – Administration interface Activate JavaScript in your browser: 1. Start Microsoft Internet Explorer. 2. Select Tools > Internet Options. The Internet Options menu will open up. 3. Select the Security settings tab. 4. Click on the Internet symbol and then on the button Custom level. 5. Scroll down to the heading Active Scripting, and select Enable, then press the OK button. 6. Close the Internet Options menu by clicking the OK button.
sunrise surf & talk Troubleshooting – Administration interface Check that the WLAN card is correctly installed in your computer: 1. Click on the START button in the Windows task bar, and select the option Settings > Control Panel. The Control Panel. menu will open up. System symbol. 2. Double click on the The System Properties menu will open up. 3. Select the Hardware tab. 4. Click on the Device Manager button. The Device Manager menu will open up. 5. Select the Network Adapters entry. 6.
sunrise surf & talk Glossary Glossary. 802.11g 802.11g is a standard for the wireless transmission of data with a data transfer speed of 54 mbit/s. The standard 802.11g is compatible with the standard 802.11b. DHCP Server DHCP is the abbreviation for Dynamic Host Configuration Protocol. The DHCP server sets an IP address range in which IP addresses can be assigned for attached devices (so-called DHCP clients). DNS Server DNS is the abbreviation for Domain Name Service.
sunrise surf & talk Glossary LAN LAN is an abbreviation for Local Area Network. A LAN is a small network of computers connected to the Internet. MAC address MAC is an abbreviation for Media Access Control. MAC addresses are unique and unchangeable addresses for network cards (i.e., LAN or WLAN cards), assigned by the manufacturer. NAT NAT is an abbreviation for Network Address Translation. This is a method of converting private IP addresses from a LAN to public IP addresses in the Internet.
sunrise surf & talk Specifications / Technical data Specifications / Technical data. Range of applications • Complete solution for the private sphere, ideal for households without DSL service • In the business world for VPN-secured access to email and intranets – for entire teams, even during travel. • In the public realm for quickly establishing a temporary infrastructure – for trade fairs, festivals and other events.
sunrise surf & talk Specifications / Technical data Data rates HSDPA: up to 1.8 Mbit/s UMTS: up to 384 Kbit/s EDGE: up to 200 Kbit/s GPRS: up to 53,6 Kbit/s WLAN: up to 54 Mbit/s (802.11b/g) Security WLAN: WEP 64/128, WPA 1+2, 802.
sunrise surf & talk Short Message Service (SMS) Sending/receiving/forwarding/address book via a browser or with a software client Operating environment Operating temperature: 0 to 40 degrees Celsius Humidity: 10% to 70% System requirements Ethernet 10/100 BaseT port or 802.