SUNRISE Technology SPECIFICATION REV: SPEC. NO.: : DATE: : 1.0 2018.11.06 PRODUCT NAME: : AI00130 ® Bluetooth 3.
Sunrise AI00130 Bluetooth® 3.0 Stereo Audio Module High performance 32-bit RISC CPU RISC 32bit CPU DC-160MHz operation Support DSP instructions 64 Vectored interrupts 4 Levels interrupt priority Peripheral Feature One full speed USB 2.
Sunrise AI00130 1、Interface Description 1-1. A I 0 0 1 3 0 PIN Diagram MUTE 14 STATUS_LED 13 USB_DM 12 USB_DP 11 MIC_IN 10 AD_KEY AUDIO_OUTL 5 4 3 AIXL NC 6 AIXR 7 AUXIN_FLOG 8 AUDIO_OUTR 9 1 GND 2 VCC+5V Figure1-1 AI00130 PIN Diagram SUNRISE Technology Co., Ltd.
Sunrise AI00130 1-2. PIN Description Table1-1 AI00130_PIN Description PIN NO.
Sunrise AI00130 2、Electrical Characteristics 2-1. PMU_VOLTAGE and CURRENT Specification 表2-1 Symbol Parameter LDOIN Voltage Input V3.3 Voltage output V1.2 Min Type Max Unit 3 3.7 5.5 V _ 3.3 _ V LDO5V = 5V, 100mA loading _ 1.2 _ V LDO5V = 5V, 50mA loading V LDO5V=5V, 100mA loading LDO5V = 5V, 10mA loading V1.5 Voltage output 1.5 VDACVDD DAC Voltage _ 3.1 _ V IL3.3 Loading current _ _ 150 mA Condition LDO5V = 5V 2-2.
Sunrise 2.5 ADC Characteristic Parameter Min. Dynamic Range 2.6 AI00130 Type Max. 91 Unit Test Condition dB 1KHz/-60dB 10Kohm loading With A-Weighted Filter S/N _ 90 _ dB THD+N _ -70 _ dB Crosstalk _ -80 _ dB 1KHz/-60dB 10Kohm loading With A-Weighted Filter BT Characteristic Table 2-4 Parameter Min. Type Max. Unit Test Condition Maximum Output Power _ 2 _ dBm _ RMS DEVM _ 5.3 _ % PEAK DEVM _ 12 _ % 99% DEVM _ 8 _ % EDR Relative Power _ -1.
Sunrise AI00130 3、PRINTED ANTENNA INFORMATION MODULE RADIATION PATTERN The stereo module contains a PCB printed antenna. The PCB printed antenna radiation pattern is shown in Figure 3-2. FIGURE 3‐1: ANTENNA KEEP OUT AREA EXAMPLES FIGURE 3‐2: ANTENNA 2D RADIATION PATTERN @2450 MHz SUNRISE Technology Co., Ltd.
Sunrise AI00130 4、Version Information Date number 2018.11.06 V1.0 Description Initial Version SUNRISE Technology Co., Ltd.
Sunrise << BLANK >> AI00130
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada, Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de classe B est conforme à la norme NMB-003. This device complies with Industry Canada licence-exempt RSS standard(s).