User manual

SM 10
SM 10/36 – Item No. 10000
Manufacturer SUNSET
Solar generator SM 10 has been developed
especially for the use in small private and
industrial appliances with low power demand e.g.
battery top-up charging, independent power supply
for mobile weather stations etc.
The 36 one fifth cells of the SM 10 made from
crystalline silicone achieve a peak power of 10
Wp. The solar cells are textured and non-
reflective. They are sandwiched within the
laminated module in soft EVA plastic (ethylene-
vinyl-acetate). This guarantees water resistance
and UV stability as well as electrical insulation and
allows thermal expansion.
The front cover of SM 10 of hardened very clear
special glass is extremly light-permeable and
robust. The Tedlar plastic reverse side is strongly
bonded to the glass layer. Anodized aluminium L-
pfrofiles from the warp resistant module frame in
which the laminate is enclosed makes universal
mounting simple. Thus the solar module SM 10 is
well protected from mechanical and climatic
influences.
The electrical connection for this module utilises a sealed connection box with a 0,5 m cable.
Technical specifications
SM 10/36
Rated power P
max
[W
p
]
10
Rated current I
MPP
[A]
0,58
Rated voltage U
MPP
[V]
17,2
Short circuit current I
K
[A]
0,64
Open circuit Voltage U
L
[V]
20,8
Length
[mm]
434
Width
[mm]
234
Height
[mm]
20
Height of terminal box
[mm]
12
Weight
[kg]
1,3
SUNSET SM 10
Limited warranty for 10 years power
output
Watt
P
[W
P
]: peak power under test conditions:
Air Mass AM = 1,5
Radiation E = 1000 W/m
2
Cell temperatur T
C
= 25
O
C