User manual

AS 80
Manufacturer SUNSET
The solar generator AS 80 consists of 36 high efficient
monocrystalline 5 “ cells.
The efficient processing resulting from this makes a favorable
Wp-price possible.
The cells distinguish themselves by particularly high electricity
output, even on cloudy days.
The total power amounts to 80 watts.
Areas of application:
The solar generator AS 80 is used in small solar
arrangements and also in off-grid house and
telecommunication applications. Also solar pump
systems and net feeds with the solar generator AS 80
can be set up. Because of the high current this module type is
very well suited to battery charging.
Construction of the Solar Generators:
The 36 monocrystalline silicon cells are embedded in soft EVA-plastic (ethyl vinyl acetate) of the
module laminate. That means humidity protection, UV stability, electric insulation and thermal
loading capacity.
The front cover of hardened very clear special glass is extremly light-permeable and robust. It is
permanently bonded together with the plastic back.
Anodized aluminium L-profiles form the warp resistant module frame in which the laminate is
enclosed.
Thus the solar module AS 80 is well protected from mechanical and climatic influences. The
connection is housed in a weatherproof wiring box at the back in which the protective diodes are
also mounted.
Technical specifications
Rated power P
max
[W
p
]
80
Rated current I
MPP
[A]
4,6
Rated voltage U
MPP
[V]
17,3
Short circuit current I
K
[A]
4,95
Open circuit Voltage U
L
[V]
21,5
Max. Systemvoltage
[V]
600
Length
[mm]
1200
Width
[mm]
526
Height
[mm]
35
Weight
[kg]
8,2
Limited warranty for 20 years power
output
W
P
= peak power under test conditions:
Air Mass AM = 1,5
Radiation E = 1000 W/m
2
Cell temperature T
C
= 25
O
C
Mechanical Characteristics
Performance curves
1000 W/m², T
c
= 25° C
1000 W/m², T
c
= 60° C
800 W/m², T
c
= 45° C
Junction Box
Cable Dimension: max. 4mm
2
Humidity Protection: IP 54
waterproof conduit connector
+ + - -
1200
526