User manual

Rutland 914i Windcharger Installation & Operation
Doc No:SM-137 Iss. C 13.02.13 7 Marlec Eng Co Ltd
Other Items
What You Will Need - Tools
x Suitable wire stripper
x Small terminal screwdriver
x Large flat blade screwdriver
x Crosshead screwdriver
x 10mm Spanner or Socket
Other Items You May Have Selected
x HRSi or HRDi Charge Regulator
x Cable (usually 2.5mm² twin core - Part No: 902-015)
x Rutland 914i Marine Mounting Kit and Stays Kit ( CA-12/02 & CA-12/32 )
x Rutland 914i Land Tower & Rigging Kit (Part Nos: CA-12/08 & CA-12/07)
x Short section of stainless steel tube to adapt into your own mounting design.
x Voltmeter & Ammeter
Other Items You Will Need
x Mounting pole
x Cable
x Batteries
x Battery terminals
x Connector blocks (as determined
by your total system)
Exploded View of The Rutland 914i
Nose Cone
With Three
Screws
Six Blades with
Twenty Four
Nacelle Dome
Generator Hub
Post Adaptor
Tail fin