Owner Manual

Sunshine GardenHouseSunshine GardenHouse
Sunshine GardenHouseSunshine GardenHouse
Sunshine GardenHouse
™™
™™
™
PO Box 2068, Longview, WA 98632
Sunshine GardenHouseSunshine GardenHouse
Sunshine GardenHouseSunshine GardenHouse
Sunshine GardenHouse
™™
™™
™
PO Box 2068, Longview, WA 98632
Congratulations on your purchase of a Sunshine GardenHouse
™
!
Before you begin, make sure your area is level.
An 8’ x 12’ level work space is needed for assembly to ensure that your
GardenHouse is squarely-built and that the panels join tightly. However, due to
wood inconsistencies and the natural moisture in redwood, some adjustments
may be necessary to fit redwood panels. You may need to loosen brackets
slightly for better fit. Use a flattened shipping box for a working surface to
protect against scratching.
The Standard Building Code states that “a greenhouse with wood frame
construction shall be located not less than 5 feet from an adjoining structure or
property line” (Section 502, Greenhouses). Your local building code may vary, so
check with local building officials.
All major components of the kit are panelized so that you and a helper can
assemble the GardenHouse in a day or two. A second person is essential to
position the panels.
The GardenHouse kit comes in seven boxes. Before you begin, please verify
the contents or your boxes using our parts inventory list.
Tools Required
• Screw gun or variable-speed drill with Phillips drive bit.
• 6-foot stepladder.
• 16-foot tape measure.
• Quick Grip Clamp as seen in photos.
• Optional: 3-5 tubes (10.1 oz. each) of silicone-based clear caulk. Use this to
seal joints, to provide additional protection against wind-driven rain or very cold
climates. This type of caulk adheres well to redwood and the glazing panels.
Always wear the appropriate safety equipment, and follow the manufacturer’s
instructions when using the power tools.
Redwood is naturally resistant to moisture and insect damage, and will fade to
a silver gray over time unless treated. If you seal or paint the wood, use a water-
based product. Acetone or Ketone products may damage the glazing.
If your GardenHouse will be subject to regular or occasional strong winds, we
recommend you anchor your GardenHouse while building. For some locations,
our anchor kits will be effective.
Note: You may notice some curl in the plastic lumber base prior to erecting
your GardenHouse. It may have shifted within the carton and a temperature
change can temporarily cause it to take a new shape. Laying the base on a
warm flat surface will allow it to become straight as its “memory” returns.
Once your GardenHouse is assembled, the base will remain straight.
1 14
E-mail or Fax Your Comments:
[e-mail]
fax [phone]
Congratulations!
You’ve completed your Sunshine GardenHouse.
We are very interested to hear about your GardenHouse experience. Please send
us your owner’s registration form so that we can keep you updated on any
special information.
Optional Bench Kit
Get the optimum use from your GardenHouse with the specially designed
GKP816 Bench kit. Made of cleargrade, dried redwood to match your
GardenHouse, it easily attaches to the house frame.
Addendum:
Use the quick grip clamp to pull the panels together tightly.