Instructions / Assembly

Contents
A. Introduction 1
B. Profile Matching 3
C. Transportation, Handling & Storage 3
D. Chemical Resistance and Fire Hazard Comments 4
E. Sawing, Cutting & Drilling 4
F. Safety Measures (during installation and afterwards) 5
G. Panel Orientation 5
H. General Information for Installation 5
I. Installation Comments (Roofing & Siding) 7
J. Fastening & Sealing 8
K. Recommended Washers & Fasteners 8
L. Side & End Lap Installation 11
M. Options for Installation 13
N. Important Installation Comments 16
O. Expansion & Contraction Table for SunSky Corrugated Polycarbonate 17
*
ask for details
Sunsky 12 in 1mm and 1.5mm thicknesses are approved by the Texas
Department of Insurance (TDI) for use in Tier III coastal counties. The FBC
installation instructions must also be followed for this approval.
TDI Approved Installation Instructions
FBC Approved Installation Instructions
To obtain FBC approval, certain installation requirements
must be met. For information about Florida Building Code
requirements and FBC approval and installation instructions,
visit the FBC web site at floridabuilding.org. Product
approval numbers are 11238 (roof decks) and 11240
(structural walls).