Instruction manual

UK-4
Manual Tuning
To tune for weak stations, use manual tuning by touching the SKIP/TUNE SEARCH(UP or DOWN) touch plate
continuously until you read the correct frequency or the reception is at its best.
Automatic Tuning
1. Touch the SKIP/TUNE SEARCH(UP or DOWN) touch plate on the unit or press the SKIP/TUNE SEARCH(UP or
DOWN) button on the remote control for a second or more, then release the button. The tuner will automatically
search the first station of suf
ficient signal strength.
2. Repeat above procedure if you wish to select another station.
Mono/stereo select
You can select the MONO/STEREO only in FM mode.
1. When you want to select FM stereo station, press the ID3/MONO/STEREO button. When you receive a FM stereo
station the "
" indicator will appear on the display, you can receive FM stereo transmission .
2. When you press the ID3/MONO/STEREO button again, the FM STEREO indicator will turn of
f and switch to
MONO FM status.
Programming preset stations
You can also preset stations of your choice and store up to 30 FM stations in its memory. To store your selected
broadcasting stations:
1. Tune to the required station.
2. Press the /MEM/CLOCK-ADJ. button.
3. Press the PRESET/FOLDER (Up or DOWN) button for your desired station number
.
4. Press the /MEM/CLOCK-ADJ. button again to confirm your selection.
5. To program more stations into memory
, repeat the above steps 2 to 4.
6. To change the stored preset stations, repeat the above steps 2 to 4.
Note: 1. Storing a new station into a preset location will erase the previously stored station in that location.
2. Power of
f will not erase the memory of preset stations. Perform the stations presetting procedures again to
store the stations.
Selecting the Preset Stations
1. Press the PRESET/FOLDER (UP or DOWN) button to select the desired preset station number.
2. The numeric location of that preset station is displayed along with the corresponding frequency.
FM Antenna
FM antenna wire is for better FM reception.
Listening To Compact Disc (CD/MP3/WMA)
1. If you want to enjoy CD/MP3, press the CD OPEN/CLOSE button once on the unit first, and then the CD door will
open automatically.(F3)
2. Insert the CD/MP3 disc into the CD compartment, press the CD OPEN/CLOSE button again, and then the CD door
will close automatically.
3. Touch the FUNCTION touch plate on the unit or press the FUNCTION button on the remote control is select to
CD/MP3 mode. The unit will read the CD/MP3/WMA disc automatically.
Note: (1) This unit can play CD, CD-R, CD-R
W, MP3 and WMA discs.
(2) It can read " 8 cm " and " Multi Section " of MP3 DISC.
(3) The "Playback Transfer Rate" in MP3 and WMA.
a. In MP3, transfer bit rate : 8 - 256 kbps.
b. In WMA, transfer bit rate : 8 - 192 kbps.
(4) The "Max Readable 99 folders and 999 tracks".
(5) If no disc or can`t read TO C, NO DISC will be
displayed.(F4)
Playing The Entire CD/MP3/WMA
- CD
1. Insert the CD disc into the CD compartment, the main unit will automatically read the
total number of the folders and tracks at the same time.
2. Touch the PLAY/PAUSE/ENTER touch plate on the unit or press the
PLAY/P
AUSE/ENTER button on the remote control, the unit will play the first track of
the CD disc automatically
.(F5)
3. Touch the PLAY/PAUSE/ENTER touch plate on the unit or press the
PLA
Y/PAUSE/ENTER button on the remote control once again, the time elapsed
indicator will flash and pause CD playback.(F6)
4. Touch the SKIP/TUNE SEARCH(UP or DOWN) touch plate once to change Track NO.,
Touch and hold the SKIP/TUNE SEARCH (UP or DOWN) touch plate on the unit once
or (on the remote control) to skip fast forward or backward of each song.
5. To resume playback, touch the PLA
Y/PAUSE/ENTER touch plate on the unit or press the PLAY/PAUSE/ENTER
button on the remote control once more again.
6. To stop playback, touch the STOP/MENU touch plate on the unit or press the STOP /MENU button on the remote
control once.
- MP3/WMA
1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically
read the total number of the folders and tracks at the same time.
2. Touch the PLAY/PAUSE/ENTER touch plate on the unit or press the PLAY/PAUSE
/ENTER button on the remote control, the unit will play the first track of the CD disc
automatically
.(F7)
3. Touch the PLAY/PAUSE/ENTER touch plate on the unit or press the PLAY/PAUSE
/ENTER button on the remote control once again, the time elapsed indicator will flash and pause CD playback.(F8)
iPod
iPod
CD/MP3/WMA OPERATION
F5
F6
F4
F3
F7