Instruction manual

UK-5
F8
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY button on
the main unit (or remote control) to power"ON" the unit.
2. Touch the FUNCTION touch plate on the main unit (or remote control) to select the
USB or SD/MMC
mode. The main unit will tomatically read the total number of the
folders and tracks at the same time. (F9)
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. T
ouch the SKIP/TUNE SEARCH(UP or DOWN) touch plate to select current track in desired folder.
4. If the MP3 and WMA are written in "ID3".
a. During the unit in the MP3 or WMA playing. Press the ID3/MONO/STEREO button once. The display will shows
a "ID3 ON", and then it will automatically to search more than 64 letters of "TITLE NAME", "AR
TIST NAME" or "
ALBUM NAME" which move from the right corner to the left corner on the display continuously.
b. Press the ID3/MONO/STEREO button once again. The display will shows a "ID3 OFF", and then the main unit
will play normally
.
Note: 1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/MMC/SDHC cards. The memory capacity up-to 32GB. It can
not access (or access a longer time) the memory capacity over 32GB. Otherwise, make an others to access it.
3. It can support USB version 1.1 and 2.0.
REPEA
T PLAY FUNCTION
4. Not support all kinds of “ dual voltage-MMC” card nor “MMC-Plus” card.
5. The main unit does not support the WMA file which is protected “DRM FILE”.
Playing The Entire flash disc
1. Playback will start by touching the PLAY/PAUSE/ENTER touch plate on the unit or
press the PLAY/PAUSE/ENTER button on the remote control . Playback starts with
the first track. The display shows the current track number and its elapsed time.(F10)
2. To interrupt playback, touch the PLAY/PAUSE/ENTER touch plate on the unit or
press the PLAY/PAUSE/ENTER button on the remote control. The time elapsed
indicator
will flash.(F1
1)
3. To resume playback, touch the PLAY/PAUSE/ENTER touch plate on the unit or
press the PLAY/PAUSE/ENTER button on the remote control again.
4. To stop playback, touch the ST
OP/MENU button.
In any time, the USB DEVICE or SD CARD must be fixed well under in the
ST
ANDBY mode to avoid the main unit and USB DEVICE or SD CARD were
damaged.
- CD
1. Touch the REPEAT touch plate on the unit or press the REPEAT button on the remote
control once, “REPEA
T" is displayed. CD will play the current track repeatedly.(F12)
2. T
ouch the REPEAT touch plate on the unit or press the REPEAT button on the remote
control twice, "REPEAT ALL" is displayed. CD will play all tracks repeatedly
.(F13)
3. Touch the REPEAT touch plate on the unit or press the REPEAT button on the remote
control once more again, REPEAT function will be of
f.
-
MP3/WMA/USB/SD CARD
1. Touch the REPEAT touch plate on the unit or press the REPEAT button on the remote control once, then"REPEAT”
is displayed. It will play the current track repeatedly.(F14)
2. Touch the REPEAT touch plate on the unit or press the REPEAT button on the remote control twice, "REPEAT ALL"
is displayed. It will play all tracks repeatedly.(F15)
3. Touch the REPEAT touch plate on the unit or press the REPEA
T button on the remote control thrice, “REPEAT
ALBUM" is displayed. It will play all tracks in the current folder repeatedly .(F16)
4. T
ouch the REPEAT touch plate on the unit or press the REPEAT button on the remote control once more again,
then REPEAT function will be off.
Note :
Note:
F9
F10
F11
F12
ID3 OPERATION
During in the MP3/WMA mode
1. Press the ID3/MONO/STEREO button on th unit (or remote control) once to open the ID3 function.
2. If the MP3/WMA file is write in “ID3” it will automatically to search the information of “TITLE NAME”, “ARTIST
NAME”and “ALBUM NAME” indicated on the display .
3. Press the ID3/MONO/STEREO button on the on th unit (or remote control) again. Then the unit will resume to play
normally.
4. To change Tra c
k NO., touch SKIP/TUNE SEARCH(UP or DOWN) touch plate on the
unit or press the PLAY/PAUSE/ENTER button on the remote control once. And touch
and hold the SKIP/TUNE SEARCH (UP or DOWN) touch plate on the unit once or (on
the remote control) to skip fast forward or backward of each song
5. To resume playback, touch the PLA
Y/PAUSE/ENTER touch plate on the unit or press
the PLAY/PAUSE/ENTER button on the remote control once more again.
6. To change the ALBUM NO., press the PRESET/FOLDER UP or PRESET/FOLDER ON once.
7. To stop playback, touch the ST
OP/MENU touch plate once on the unit (or remote control).
Note: If the main unit is not working properly
, disconnect the power source and then reconnect it again.
F13
F14
F15
F16