Use and Care

12
For Built-in Installations
A side burner is designed for easy installation into masonry enclosures. For non-combustible
applications, the side burner drops into the opening (as shown in cut-out detail drawing - Fig. A)
above or below depending on space, and hangs from its counter top trim. A deck is not required to
support it from the bottom. It is recommended that the enclosure have ventilation holes to prevent gas
build-up in the event of a leak. The deck ledges and counter should be flat and level in reference to the
floor.
LP TANK STORAGE AREA MUST BE ISOLATED FROM SIDE BURNER AND VENTED.
Cut out Dimensions figure
A
WIDTH DEPTH HEIGHT
2CSB
12”
20-1/4”
8”
1SSB
10”
16-1/8”