Spec Sheet

Product Dimensions
Cabinet Features
SUNSTONE METAL PRODUCTS
DESCRIPTION
44" X 32" Height ADA
Compliant Sink
44" ADA Compliant Sink Base
Cabinet w/ adjustable height and
depth center panel
Item No. ADA44BC
PRODUCT
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: [phone]
Bus: 512.487.5116
Fax: [phone]
44"W x 28-1/4"D
(w/Panel) x 32"H
MATERIAL SPECS
304 Stainless Steel entire
structure, 18 Gauge for Door
Panel , 18 Gauge for Cabinet
Box, 18 Gauge for Shelf,
�Lifetime Structure Warranty
�304 Stainless Steel Structure
�304 SS Rod Handles
�Pin-Lock & Screwed Installation
�Covered Access Ports
PRODUCT DIMENSIONS
Interior Dimensions
33" HEIGHT W/3/4"
COUNTER INSTALLED
1-GANG ELECTRICAL BOX
LOCATION (NOT INCLUDED)
FRONT PANEL CAN BE REMOVED
BY LIFTING UP SLIGHTLY AND
PULLING STRAIGHT OUT OF CABINET
FLOOR ACCESS PANEL
WHEN CENTER PANEL IS PLACED IN
BACK POSITION, IN IT'S PLACE INSTALL
THE TWO LEFT AND RIGHT SIDE HANDLES
Center Panel can be placed in the Forward or Back
Positions, bydetaching the Left/Right bracket and re-
positioning. When placed in the Back position, locate
the Two Pull-Handles and install them in the Left/Right
positions were Panel was installed in Forward Position.
Center Panel can be lifted to meet counter level for
ADA 37" Sink Installation.
44" WIDTH
28-1/4" DEPTH
32" HEIGHT
When Center Panel is raised
to counter level 37" ADA Sink
can be position right at front.