Specification

PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
23" DEPTH
18" FRAME WIDTH
23" FRAME HEIGHT
Designer Series, Raised Style - 18"
Paper Towel w/Large Single Drawer
Combo
23" Height Paper Towel
Holder w/Large Single Drawer
Item No. DE-DPCF23
Product Dimensions Product Features
16-1/2" WIDTH
INSERT CABINET
USE DRILL TO SECURE SCREWS
IN PLACE THROUGH HOLES
SCREW NOT
INCLUDED
USE GLOVE TO HAND SCREW
PEG-LEG DOWN TO FLOOR
BASE - USE LEVELER TO
CONFIRM ELEVATION
ROD HANDLE
SOFT-CLOSING
DRAWER TRACK
COMPONET FEATURES
A 1/16" RAISED FRAME
VISIBLE EDGE ENABLING
YOU TO PLACE TWO OR
MORE COMPONETS SIDE
BY SIDE OR ONTOP OF
ONE ANOTHER CREATING
ONE SINGLE LARGER
FUNCTIONING COMPONET
OF YOUR OWN CHOOSING
COMBINE MULTIPLE COMPONENTS TOGETHER
INTO UNLIMITED COMBINATIONS
DE-DPCF23
DE-TRD18
PAPER TOWEL ROLL
NOT INCLUDED
21"
HEIGHT
2. REMOVE DRAWERS
3. MOUNT DRAWER & LOWER LEGS
1 . INSERT COMPONET
REMOVE DRAWERS IN
ORDER TO MOUNT BOX
•Pull the drawer fully
open so Levers are
visible.
•Push "DOWN" on the
right lever, and "UP"
on the left lever.
•Holding levers in
place, pull drawer
toward you.
Product Installation
See SUNSTONE manufacture website for additional
product support and product tutorials:
www.sunstonemetalproducts.com
IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF EACH
PANEL, YOU MUST UNSCREW EACH ONE AND MOUNT ON OUTSIDE OF
DRAWER OR DOOR PANEL.
HAVE 22"
CLEARANCE
INSIDE DEPTH
ISLAND WALL CUT-OUT SIZE IS
16-1/2" WIDTH BY 21" HEIGHT BY 22" DEPTH
18" WIDTH x23" HEIGHT x23"
DEPTH (PRODUCT SIZE) 16-1/2"
WIDTH x21" HEIGHT x22" DEPTH
(CUT-OUT)
•EXTERIOR FINISH -----------------3 YEARS
•ROD HANDLES---------------------3 YEARS
•DRAWER TRACK------------------ 1 YEAR
•PEG-LEGS--------------------------- 1 YEAR
Frame is made from 16 gauge 304 SS,
and panel's are made from 18 gauge
304 SS. Paper Towel Holder is 18
gauge 304 SS. Inside Drawer Box is
made with 20 gauge 201 SS. Handle is
Solid 304 SS.
DE-TD23