Specification

PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
23" DEPTH W/DRAWERS
18" FRAME WIDTH
23" FRAME HEIGHT
Designer Series, Raised Style - 18" x
23" Height Triple Drawer
23" Height Triple
Drawer
Item No. DE-DD23
Product Dimensions Product Features
16-1/2" WIDTH
INSERT CABINET
ISLAND WALL CUT-OUT SIZE IS
16-1/2" WIDTH BY 21" HEIGHT BY 22" DEPTH
USE DRILL TO SECURE SCREWS
IN PLACE THROUGH HOLES
SCREW NOT
INCLUDED
USE GLOVE TO HAND SCREW
PEG-LEG DOWN TO FLOOR
BASE - USE LEVELER TO
CONFIRM ELEVATION
SOFT-CLOSING
DRAWER TRACK
21"
HEIGHT
ADJUSTABLE PEG-LEGS
SEALED DRAWER BOX
COMPONET FEATURES
A 1/16" RAISED FRAME
VISIBLE EDGE ENABLING
YOU TO PLACE TWO OR
MORE COMPONETS SIDE
BY SIDE OR ONTOP OF
ONE ANOTHER CREATING
ONE SINGLE LARGER
FUNCTIONING COMPONET
OF YOUR OWN CHOOSING
COMBINE MULTIPLE COMPONENTS TOGETHER
INTO UNLIMITED COMBINATIONS
DE-TD23
DE-TRD18
ROD HANDLE
2. REMOVE DRAWERS
3. MOUNT DRAWER & LOWER LEGS
1 . INSERT COMPONET
REMOVE DRAWERS IN
ORDER TO MOUNT BOX
•Pull the drawer fully
open so Levers are
visible.
•Push "DOWN" on the
right lever, and "UP"
on the left lever.
•Holding levers in
place, pull drawer
toward you.
Product Installation
See SUNSTONE manufacture website for additional
product support and product tutorials:
www.sunstonemetalproducts.com
IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF EACH
PANEL, YOU MUST UNSCREW EACH ONE AND MOUNT ON OUTSIDE OF
DRAWER OR DOOR PANEL.
HAVE 22"
CLEARANCE
INSIDE DEPTH
18" WIDTH x23" HEIGHT x23"
DEPTH (PRODUCT SIZE) 16-1/2"
WIDTH x21" HEIGHT x22" DEPTH
(CUT-OUT)
Frame is made from 16 gauge 304 SS,
and panel's are made from 18 gauge
304 SS. Inside Drawer Box is made with
20 gauge 201 SS. Handle is Solid 304
SS.
•EXTERIOR FINISH -----------------3 YEARS
•ROD HANDLES---------------------3 YEARS
•DRAWER TRACK------------------ 1 YEAR
•PEG-LEGS--------------------------- 1 YEAR