Spec Sheet

PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
18" FRAME WIDTH
13" FRAME HEIGHT
Designer Series, Raised Style - 18" x
13" Height Double Drawer
13" Height Double
Drawer
Item No. DE-DD13
18" WIDTH x13" HEIGHT x23"
DEPTH (PRODUCT SIZE) 16-1/2"
WIDTH x11" HEIGHT x22" DEPTH
(CUT-OUT)
Product Dimensions Product Features
16-1/2" WIDTH
HAVE 22"
CLEARANCE
INSIDE DEPTH
INSERT CABINET
ISLAND WALL CUT-OUT SIZE IS
16-1/2" WIDTH BY 11" HEIGHT BY 22" DEPTH
USE DRILL TO SECURE SCREWS
IN PLACE THROUGH HOLES
SCREW NOT
INCLUDED
ADJUSTABLE LEG
USE GLOVE TO HAND SCREW
PEG-LEG DOWN TO FLOOR
BASE - USE LEVELER TO
CONFIRM ELEVATION
23" DEPTH
ROD HANDLE
11"
HEIGHT
REMOVE ALL
DRAWERS
See SUNSTONE website for
drawer removal tutorial
SOFT-CLOSING
DRAWER TRACK
COMPONET FEATURES
A 1/16" RAISED FRAME
VISIBLE EDGE ENABLING
YOU TO PLACE TWO OR
MORE COMPONETS SIDE
BY SIDE OR ONTOP OF
ONE ANOTHER CREATING
ONE SINGLE LARGER
FUNCTIONING COMPONET
OF YOUR OWN CHOOSING
DRAWERS STACK
ONTOP OF ONE
ANOTHER, ADJUST
PEG-LEGS BETWEEN
EACH DRAWER
BOX
DE-DD13
ON TOP
DE-DD13
ON BOTTOM
COMBINE MULTIPLE COMPONENTS TOGETHER
INTO UNLIMITED COMBINATIONS
2. REMOVE DRAWERS
3. MOUNT DRAWER & LOWER LEGS
1 . INSERT COMPONET
REMOVE DRAWERS IN
ORDER TO MOUNT BOX
•Pull the drawer fully
open so Levers are
visible.
•Push "DOWN" on the
right lever, and "UP"
on the left lever.
•Holding levers in
place, pull drawer
toward you.
Product Installation
See SUNSTONE manufacture website for additional
product support and product tutorials:
www.sunstonemetalproducts.com
IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF EACH
PANEL, YOU MUST UNSCREW EACH ONE AND MOUNT ON OUTSIDE OF
DRAWER OR DOOR PANEL.
Frame is made from 16 gauge 304 SS,
and panel's are made from 18 gauge
304 SS. Inside Drawer Box is made with
20 gauge 201 SS. Handle is Solid 304
SS.
•EXTERIOR FINISH -----------------3 YEARS
•ROD HANDLES---------------------3 YEARS
•DRAWER TRACK------------------ 1 YEAR
•PEG-LEGS--------------------------- 1 YEAR