User Manual

Page 2
1. WALL CABINETS – PARTS DIAGRAM
REQUIRED TOOLS
INCLUDED HARDWARE & PARTS
Each Wall Cabinet includes multiple Anchor Mounting
Bolts. Anchor Mounting Bolts are adaptable with any ½”
Socket Wrench. The Load Capacity per bolt is approximate
200 Pounds, even so we still recommend one bolt for every
available hole in support rails.
Unlike the lower base cabinets which use Pin-Lock’s to
secure in place next to one another, the Upper Wall
Cabinets use a combination #2 Phillips Screw and 4 Mil.
Nut Cap. The two end are inserted in through
corresponding holes on the interior of cabinets meeting
each other, at the top/middle/bottom positions.
Each Wall Cabinet includes multiple
Anchor Mounting Bolts. Anchor
Mounting Bolts are adaptable with
any ½” Socket Wrench.
#2 PHILLIPS
SCREW DRIVER
HOUSEHOLD
HAMMER
4 MIL. ALLEN
WRENCH
ELECTRIC
HAMMER DRILL
SOCKET WRENCH
W/ ½” SOCKET