User Manual

Page 7
6.WALL CABINETS – PANEL & CABINET DETAILS
Continue placing Support Rails along one
direction off from the starter cabinet position.
Install all support rails in any one direction
before adding more cabinets.
If placing any of the following cabinets
SWC18CSDL, or SWC18CSDR, these
cabinets are most often used for Sink or
Cleanup areas and are shorter in height and
will not have any Bottom Support Rails.
If placing any Spacers, remember to also
place the Spacer Rail Supports, these do not
attach to the spacer panel themselves, instead
they work to create the correct spacing
between other wall cabinets positions.
When placing either of the following cabinets
SWC18CSDL, or SWC18CSDR, be sure to
place the End Panel, Item No. SWC21EP
onto the opposing cabinet lower base side,
this will seal the inner area on the inside
ATTENTION: Be sure to install each Crown Molding Panel on top of each
cabinet before lifting cabinet into place. Handles can be placed Last.