Instructions / Assembly

Page 9
7. ALL CABINETS - ISLAND LAYOUT
Now that you have individually configured each cabinet, it is time to set them up into the general
layout of your island design. Be sure to give some distance between each cabinet so you can move
your body between each one.
IMPORTANT!!! You must individually attach each cabinet together, do not try and attach three or
more together at once. Using a Leveler, place on top of each cabinet group as you assemble, taking
special precaution that the top is Leveled as you go. Each peg leg is adjustable within 1-1/2” Inches,
to composite for any uneven ground, additional some leveling may be required for lower drainage
dips in your patio, but also know that as all cabinets are attached to one another, they will hold very
strong together and leveled. So if one or two cabinets are slightly elevated, this should not impact
the overall integrity of island assembly.
ATTENTION: Place all Kickplates Last after all cabinets are attached and
legs are leveled. Install Kick Plates from the Left to the Right always.