Instructions / Assembly

Page 8
7.WALL CABINETS – SECURING CABINETS
Place the remaining cabinets along pre-installed Support Rails, remember to confirm all Top
of Cabinet Crown Molding Panels are installed before cabinet is lifted into place. Per this
Example, we placed the following cabinets starting from the Right, SWC12SLS,
SWC30FDD, SWC18CSDR, SWC18CSDL, SWC36FDD, SWC6SPF.
Spacers Panels attached to the Front side
of wall cabinet only, using the included
“Cabinet Spacer Joint Screw & Nut”.
Thread the long screw through each hole
located on the inside left and right sides
of cabinet with doors open. Typically,
there will be Three Holes, Top, Middle,
and Bottom.