Installation Manual

Page 5
When placing the top Support Rails, pay
special attention that all Arrows are pointing
in “UP” position, otherwise the interlocking
teeth will not align. **Important Note –
you may need to thread each bolt through
the corresponding holes**
Complete all Lower and Upper Support
Rails installations for the first Wall
Cabinet position. Confirm all positions
are correct as the rest of the installation
will follow along, if any errors this will
cause a larger issue.
Confirm Spacing Height measured from
base of Lower Support Rail to the Top
Edge of Upper Support Rail when secured
in place. Again Confirm all Elevations
are precise using Leveler Tool.
All Upper and Lower
Support Rails feature
Interlocking Teeth
that are designed to
make it much easier to
build out even
horizontal straight
lines, one piece at a
time.
ATTENTION: When mounting Upper Support Rails – be sure to always face
Arrows in “UP” positions, or the interlocking teeth will not line up.
4.WALL CABINETS – UPPER SUPPORT RAILS