How to Guide

GRILL START
-
UP
–
LIGHTING THE GRILL
PAGE 14
REMOVE COVER & OPEN VENT
1. Ensure Grill Control Knobs
are In the OFF position, turn
either KNOB to High Position.
2.
Light the Main Burners by turning
either one KNOB counter-clockwise to
HIGH Push in and SLOWLY turn. Allow
Gas to Completely Fill the IR Burner
chamber.
3. You will hear a loud click as
the
electronic lighter produces a spark.
Listen for the sound of the gas igniting
and look for a flame through the cooking
grids. If the burner does not light on the
first try, repeat immediately.
5. If the burner does not light in 5
seconds then wait five minutes until
the gas clears before attempting to
light it again. Repeat the procedure
or try the manual lighting options on
6
. Upon successful lighting, repeat
the
process on the other burner.
7
. To shut off the burners,
rotate the
knob and turn to OFF.
8
. It is normal to hear a popping sound
when the burners are turned off.
REMOVE COVER WHEN
LIGHTING THE GRILL & OPEN
BACK VENT PANEL
4. The Gas must completely fill the
entire IR-Burner so repeat this until IR
Burner lights all the way across and
stays lit.