Installation Guide

Product Dimensions
Cabinet Features
SUNSTONE METAL PRODUCTS
DESCRIPTION
12" x 12" Full Height Corner Wall
Cabinet w/360 Swivel Shelf
12" x 12" Width Full Height Wall
360 Swivel Corner Shelf
Item No. SWC12SLS
PRODUCT
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: [phone]
Bus: 512.487.5116
Fax: [phone]
12" x 12" W x 14"D (w/Panel) x
42"H or 44"H (w/Crown)
MATERIAL SPECS
304 Stainless Steel entire
structure, 18 Gauge for Door
Panel , 18 Gauge for Cabinet
Box, 18 Gauge for Shelf,
Handles are made of Solid 304
Stainless Steel Bar.
•Lifetime Structure Warranty
•304 Stainless Steel Structure
•304 SS Rod Handles
•2" Crown Molding
•Pin-Lock & Screwed Installation
•Cabinet Style Door Hinges
•Covered Access Ports
•Three Interior Shelves
•360 Swivel Door & Shelves
Wall Cabinet Installation -
See full Cabinet Island Instruction for complete details
PRODUCT DIMENSIONS
42" Cabinet Height
14" Depth
w/Door
Base Cabinet Height
is 34-1/2" W/Legs
measured without
Counter Top. Base Cabinets
are adjustable up to 36" Max
Elevate Cabinet
Spacing 14" to 18" Above
Base Cabinets
Use Included Hardware
to Mount Wall Cabinet
Support Rails. Measurement
from Top Edge of upper rail
to Bottom Edge of lower rail
spacing is 40-1/2" Inches.
Cabinet Bottom Support
Rail Cups around bottom
edge of Full Height cabinets
Notice Interlocking Teeth
Connect into each other
Cabinet Hooks into
each Sleeve along
Support Rail allowing
Cabinet to Free Hang
against wall
Easy Pin-Lock
Removable
Crown Molding
5" x 4" Removable
Top Cabinet Panel
for Light Installation
Snap-On Plastic
Utility Port Covers
2" Height Crown
Molding
Cabinet Base Support
is not required for
this Upper Wall Cabinet
12" Inside Width
360 Degree Rotating
Swivel Shelves