Brochure

ManualsBrandsSuntec ManualsHeating SpecialtiesSingle Stage Oil Pump (3450 RPM)

SUNTEC

PERFORMANCE-PROVEN FUEL UNITS

AND VALVES

...for residential and commercial applications

SUNTEC, THE INDUSTRY LEADERS z

BUILT ON OUR COMMITMENT

Knowing the industry’s need and responding to them with the right products and services is one of the

responsibilities of leadership. Over the years, Suntec has been committed to being involved, asking

questions, listening and providing answers. Today, as the industry leaders, our involvement is as

strong as ever. We still work hard to earn your trust in us as the experts in our field. You shouldn’t

have to settle for less.

MODEL A-7000 z SINGLE-STAGE FUEL UNITS

y Single-pipe installations to 6” hg. vacuum

y Two-pipe installations to 12” hg. vacuum

y Lift or gravity feed applications with 10 psi maximum

inlet/return pressure

y Choice of 1725, 2850, 3450 rpm

y Suitable for no. 2, no. 1 fuel oil, or kerosene

y Mounting in any position

y Factory-set at 100 psi

y Adjustable range 100-150 psi at 3450 rpm, 100-135 psi

at 1725 rpm. Models available to 200 and 300 psi.

I-1

Summary of content (12 pages)

PAGE 1
SUNTEC PERFORMANCE-PROVEN FUEL UNITS AND VALVES ...for residential and commercial applications SUNTEC, THE INDUSTRY LEADERS z BUILT ON OUR COMMITMENT Knowing the industry’s need and responding to them with the right products and services is one of the responsibilities of leadership. Over the years, Suntec has been committed to being involved, asking questions, listening and providing answers. Today, as the industry leaders, our involvement is as strong as ever.
PAGE 2
SPECIFICATIONS* /ORDERING INFORMATION Model Number RPM Rotation1 Nozzle Port Location1 Strainer & Nozzle Rating at 100 psi Special Features ---3-bolt mtg. hub -- A1VA-7112 A1VB-7113 A1VC-7114 A1VD-7741 A1YA-7912 A2VA-3006 A2VA-7142 A2VA-7116 A2VB-7117 A2VC-7118 A2VA-7416 A2YA-7743 A2YA-7916 A2YA-7430 1725 1725 1725 1725 1725 R.H. R.H. L.H. L.H. R.H. R.H. L.H. L.H. R.H. R.H. 3 gph 3 gph 3 gph 3 gph 7 gph 2850 3450 3450 3450 3450 3450/2850 3450 3450 R.H. R.H. R.H. L.H. R.H. R.H. R.H. R.H. R.H.
PAGE 3
Typical Model Number Nomenclature (Model A & Model B):* *The model number appears on the fuel unit label. MODEL B-8000 • TWO-STAGE FUEL UNITS y y y y y y y y Two-pipe installations up to 17” hg. vacuum Lift or gravity feed applications with 10 psi maximum inlet/return pressure Capacities to 7 gph, except boost pumps Factory-set at 100 psi Pressure adjustable from 100 to 150 psi at 3450 rpm, 100 to 135 psi at 1725 rpm. Models available to 200 and 300 psi Choice of 1725, 2850, 3450 rpm Suitable for no.
PAGE 4
SPECIFICATION*/ORDERING INFORMATION Model Number RPM Rotation1 Nozzle Port Location1 B1VA-8212 B2VA-8216 B2YA-8916 B2VA-8416 1725 3450 3450 3450 R.H. R.H. R.H. R.H. R.H. R.H. R.H. R.H. Strainer & Nozzle Rating at 100 psi 3 gph 3 gph 7 gph 3 gph B2VA-8241 3450 R.H. R.H. -- B2VA-8242 2850 R.H. R.H. 2.25 gph Special Features --3 gph at 200 psi Solenoid dumping fuel unit Boost pump, 20 gph at 10-20 psi -- *Also apply to “-8” model numbers (shown on fuel unit). For example: “8212-6,” etc.
PAGE 5
MODEL B-8200 • TWO-STAGE HIGH CAPACITY HIGH PRESSURE (NOT PICTURED) AND MODEL B-8800 • TWO-STEP TWO-STAGE y y y y y y y y Two-pipe installations up to 17” hg. Vacuum Lift or gravity feed applications with 10 psi maximum inlet/return pressure Adjustable manual or automatic high/low firing High efficiency burner applications Capacities to 23 gph Pressure adjustable (100 to 200 psi low fire, 200-300 psi high fire) For no. 2 fuel oil.
PAGE 6
Model Number RPM B2VA-8243 B2TA-8245 B2TA-8248 3450 3450 3450 B2TA-8850 B2TA-8851 B2GA-8852 3450 3450 3450 Rotation1 High-Capacity Units R.H. R.H. R.H. Two-Step Units R.H. R.H. R.H. Nozzle Port Location1 Strainer & Nozzle Rating at 300 psi R.H. R.H. R.H. 3 gph2 16 gph 8 gph3 R.H. R.H. R.H. 10 gph 16 gph 23 gph *Also apply to “-8” model numbers (shown on fuel unit). For example: “8850-8,” etc. 1 2 3 Viewed from shaft end. At 130 psi. At 150 psi.
PAGE 7
SPECIFICATION* /ORDERING INFORMATION Maximum Firing Rate* (gph) 1725 rpm 3450 rpm 100 psi 300 psi2 100 psi 300 psi3 JJ2 Std. --3 -JA2 Std. --7 -JB2 Std. --10 -J2 Std. 3 -16 -J3 Std. 7 -20 -G 8 -24 10 N 9 -26 14 J4 Std. 11 -30 17 N 13 -33 23 J5 Std. 17 -40 28 N 19 5 46 32 J6 Std. 24 7 55 40 N 26 10 60 45 *Special Pressure Spring Choices: A = 20-40 psi C = 150-300 psi E = 10-20 psi B = 75-200 psi D = 40-80 psi 1 Do not adjust J2 and 3450 rpm-only models (JA, JB, JJ) to higher than 100 psi.
PAGE 8
Typical Model Number Nomenclature (Model J & Model H):* * The model number appears on the top of the fuel unit. MODEL H TWO-STAGE FUEL UNITS y y y y y y Two-pipe high lift installations to 17” hg. vacuum Capacities to 83 gph Lift or gravity feed applications with 10 psi maximum inlet/return pressure Six pressure options, 10 to 300 psi* For no.
PAGE 9
SPECIFICATIONS* /ORDERING INFORMATION Model Number1 Piston Type HA2 H2 H3 Std. Std. Std. G N Std. N Std. N Std. N Std. N Std.
PAGE 10
MODEL R & C • SHUT-OFF VALVES y y y y y y y y y y For instantaneous, redundant cutoff of fuel supply Provides back-up protection Closes when current to solenoid coil is interrupted Blocks oil flow to nozzle Delay or non-delay opening Two model choices: Model R mounts to fuel unit; Model C mounts to burner or other remote locations Easy installation Use with any fuel unit rated up to 16 gph Suitable for no. 2, no.
PAGE 11
SPECIFICATIONS/ ORDERING INFORMATION Valve Model No. Opening Pump Burner Response Mount Mount R642N C642N Non-Delay R641D C641D Delay R753N C753N Non-Delay R261N C261N Non-Delay Color Code 115 115 220 Maximum Operating Pressure 300 psi 150 psi 300 psi Black Grey Black 24 300 psi Green Voltage (50/60 Hz.
PAGE 12
Typical Model Number Nomenclature (Model R & Model C):* *The model number appears on the valve label.