Operation Manual

PLEASE READ COMPLETELY BEFORE OPERATING
READ AND SAVE THESE INSTRUCTIONS
WARNING! To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
To reduce the risk of fire or electrical shock, do not expose to water or rain.
Caution: read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance
Use fan only for intended use, as described in instruction manual.
To protect against electrical shock, do not immerse unit, plug, or cord in water or spray with liquids.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and
before cleaning.
Never insert fingers, pencils or any other objects through the grille when fan is running.
Disconnect fan before cleaning.
Make sure fan is on a stable surface when operating to avoid chance of overturning.
Do not use fan in a window. Rain may cause an electrical hazard.
Do not operate in the presence of explosive and/or flammable fumes.
Do not place fan or any parts near an open flame, cooking or other heating appliances.
Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or
damaged in any manner.
Do not let cord hang over table or counter or touch hot surfaces.
To disconnect, grip plug and pull from wall outlet. Never yank on cord.
Always use on a dry surface.
This product is intended for household use only and not for commercial or industrial use.
Do not use fan near curtains, plants, window treatments, etc.
POWER CORD SAFETY TIPS
1. Never pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance
should be serviced and the power cord replaced. Please return it to our Service Department or to an authorized service
representative.
5. Never wrap the cord tightly around the appliance, as this could cause the appliance to fray and break.
DO NOT OPERATE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE, OR WORKS INTERMITTENTLY AND
STOPS WORKING.
IMPORTANT: During the first few minutes of initial use, a slight odor may be noticeable. This is normal and will quickly
disappear.
NAME OF ALL PARTS
1. Front enclosure
2. Switch
3. Propeller
4. Screws of rear enclosure
5. Rear enclosure
6. Screws
7. Rear Base
8. Front Base
9. Power cord
ASSEMBLY INSTRUCTIONS