User's Manual

ST-100M Module
11
2.5.4 Response
Execution command : <text>
2.6 ATL
2.6.1 Description
Set volume of the monitor speaker.
2.6.2 Format
Execution command : ATL[<value>]
2.6.3 Field
Type Short name Parameter/comment
Integer value
0 Low speaker volume
1 Low speaker volume
2 Medium speaker volume
3 High speaker volume
2.6.4 Response
Execution command : OK
2.7 ATO
2.7.1 Description
Switch from on-line command mode to on-line data mode during an active call. Returns ERROR when not in
on-line command mode.
2.7.2 Format
Execution command : ATO
2.7.3 Field
Type Short name Parameter/comment
String text
28800 Connected with data bit rate of 28800 bits/s (HSCSD)
19200 Connected with data bit rate of 19200 bits/s (HSCSD)
14400 Connected with data bit rate of 14400 bits/s (HSCSD)
9600 Connected with data bit rate of 9600 bits/s
4800 Connected with data bit rate of 4800 bits/s
2400 Connected with data bit rate of 2400 bits/s