User's Manual

ST-100M Module
12
2.7.4 Response
Execution command :
CONNECT
CONNECT <text>
NO CARRIER
ERROR
2.8 ATP
2.8.1 Description
Select pulse dialing. (This setting is ignored.)
2.9 ATQ
2.9.1 Description
Set result code suppression mode.
2.9.2 Format
Execution command : ATQ[<value>]
2.9.3 Field
Type Short name Parameter/comment
Integer value
0 DCE transmits result codes.
1 Result codes are suppressed and not transmitted.
2.9.4 Response
Execution command : OK
2.10 ATS0
2.10.1 Description
Automatic answer.
This S-parameter controls the automatic answering feature of the DCE. If set to 0, automatic
answering is disabled. If set to a non-zero value, the DCE shall cause the DCE to answer when the
incoming call indication (ring) has occurred the number of times indicated by the value.
2.10.2 Format
Execution command : ATS0=<value>