User's Manual

ST-100M Module
39
<mem3>,<used3>,<total3>
+CMS ERROR: <err>
+CPMS=? +CPMS: (list of supported <mem1>s),(list of
supported <mem2>s),
(list of supported <mem3>s)
7.3 AT+CMGF – Message Format (Sec 3.2.3)
7.3.1 Description
Sets the input and output format to be used by the TA.
7.3.2 Format
Command Possible response(s)
+CMGF=[<mode>]
+CMGF? +CMGF: <mode>
+CMGF=? +CMGF: (list of supported <mode>s)
7.3.3 Field
<mode>:
0 PDU mode (default when implemented)
1 text mode
7.4 AT+CSCA – Service Center Address (Sec 3.3.1)
7.4.1 Description
Updates the SMCS address, through which mobile-originated SMSs are transmitted. In text mode, the setting
is used by send (AT+CMGS) and write (AT+CMGW) commands. In PDU mode, the setting is used by the
same commands, but only when the length of the SMCS address (coded into <pdu> parameter) equals zero.
7.4.2 Format
Command Possible response(s)
+CSCA=<sca>[,<tosca>]
+CSCA? +CSCA: <sca>,<tosca>
+CSCA=? +CMGF: (list of supported <mode>s)