User's Manual

ST-100M Module
42
7.9.3 Field
<profile>:
0...255 manufacturer specific profile number where settings are to be stored
7.10 AT+CNMI – New Message Indications to TE (Sec 3.4.1)
7.10.1 Description
Selects the procedure how the reception of new messages from the network is indicated to the TE when TE
is active (DTR signal is ON). IF TE is inactive (DTR signal OFF), message reception is carried out as
specified in GSM 03.38. This command enables the unsolicited result codes +CMT, +CMTI, +CBM, and
+CDS. (Please refer to 07.07 for more detail)
7.10.2 Format
Command Possible response(s)
+CNMI=[<mode>[,<mt>[,<bm>[,<ds> ,<bfr>]]]]] +CMS ERROR: <err>
+CNMI? +CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
+CNMI=?
+CNMI: (list of supported <mode>s),(list of
supported <mt>s),(list of supported
<bm>s),(list
of supported <ds>s),(list of supported <bfr>s)
7.10.3 Field
<mode>
0 disable unsolicited result code
1 Discard indication and reject new received message unsolicited result codes
when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward them directly to the TE.
<mt>
0 No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed to the TE using
unsolicited result code: +CMTI: <mem>,<index>
2 SMS-DELIVERs (except class 2 messages and messages in the message waiting indication group
(store message)) are routed directly to the TE using unsolicited result code:
+CMT: [<alpha>],<length><CR><LF><pdu> (PDU mode enabled); or
+CMT: <oa>, [<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>, <length>] <CR><LF>
<data> (text mode enabled; about parameters in italics, refer command Show Text Mode
Parameters +CSDH)
3 Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes defined in <mt>=2.
Messages of other data coding schemes result in indication as defined in <mt>=1.
<bm>