User's Manual

ST3310 User Manual

[command] ST3310NTW;850000;02;0;internet;;;111.111.111.111;8600;;;;

[response] ST3310NTW;Res;850000;010;0;internet;;; 111.111.111.111;8600;;;;

ST3310NTW;Res;850000;010;A1;tim.br;tim;tim; 111.111.111.111;8600;;;;

<notes>

** If network does not require User ID and Password, these fields should be empty.

Automatic WCDMA Set

It the device is set to ‘Automatic WCDMA Set’, the device set WCDMA parameters automatically depending

on inserted SIM.

For example, if Airtel SIM is inserted, the device set AUTH to 0, APN to “aitelWCDMA.com”, USER_ID and

USER_PASS to empty.

And the device reports response string after adding real WCDMA parameters when automatic WCDMA set

is selected.

4-2. Report Parameter Setting

HDR DEV_ID VER T1 T2 T3 A1 SND_DIST T4 SMS_T1 SMS_T2 SMS_PACK_NO

ANGLE_RPT RPT_TYPE

● Definition : Set parameters related on report interval.

Field Definitions Unit Remark

HDR “ST3310RPT” Command type

DEV_ID 6 char. Device ID

VER “02” Protocol Version

T1 String Sec Interval for sending status report in parking mode

Range : 0 ~ 86400

If 0, report in parking will be sent only one time when

vehicle starts parking.

T2 String Sec Interval for sending status report in driving mode

Range : 0 ~ 60000

If 0, report in driving will be sent only one time when

vehicle starts driving.