User's Manual

ST3500 User Manual
13
4-5. Service Parameter Setting
HDR
DEV_ID
VER
PARKING_LOCK
SPEED_LIMIT
PWR_DN
CON_TYPE
ZIP
GROUP_SEND
MP_CHK
ANT_CHK
BAT_CHK
M_SENSOR
CALL
GEO_FENCE
DATA_LOG
ANTITHFT_CNT1
ANTITHFT_CNT2
JAM_DET
JAM_CHK_DIST
JAM_CHK_TM
● Definition : Set parameters related report.
Field
Definitions
Unit
Remark
HDR
“ST3500SVC”
Command type
DEV_ID
6 char.
Device ID
VER
“02”
Protocol Version
PARKING_LOCK
‘0’ or ‘1’
Parking lock enable (1) / disable (0)
If 1, the device checks vehicle position in parking
periodically. When the vehicle goes off some boundary or
starts moving over some velocity, the device reports
parking lock emergency.
SPEED_LIMIT
String
Km/h
Over speed limit
If 0, the device does not check over speed.
If 1 and the vehicle runes over predefined value, device
reports speed alerts once.
PWR_DN
‘0’ ~ ‘2’
Power saving type
0 : Disabled sleep and deep sleep service
1 : Enabled deep sleep
2 : Enabled sleep
CON_TYPE
‘0’ ~ ‘2’
Connection Type with Server
0 = KEEP_CON
1 = KEEP_DISCON
2 = KEEP_NOP
Detail explanation is below.
ZIP
‘0’ or ‘1’
Use Zip
Disable (0) / Enable (1)