User's Manual

ST4500 User Manual

For no use, it should be empty.

PIN_NO String PIN Number to release PIN lock if it is enabled

[command] ST4500NTW;850000;02;0;internet;;;111.111.111.111;8600;;;;

[response] ST4500NTW;Res;850000;010;0;internet;;; 111.111.111.111;8600;;;;

ST4500NTW;Res;850000;010;A1;tim.br;tim;tim; 111.111.111.111;8600;;;;

<notes>

** If network does not require User ID and Password, these fields should be empty.

Automatic LTE-M1 Set

It the device is set to ‘Automatic LTE-M1 Set’, the device set LTE-M1 parameters automatically depending on

inserted SIM.

For example, if Airtel SIM is inserted, the device set AUTH to 0, APN to “aitelLTE-M1.com”, USER_ID and

USER_PASS to empty.

And the device reports response string after adding real LTE-M1 parameters when automatic LTE-M1 set is

selected.

4-2. Report Parameter Setting

HDR DEV_ID VER T1 T2 T3 A1 SND_DIST T4 SMS_T1 SMS_T2 SMS_PACK_NO

ANGLE_RPT RPT_TYPE

● Definition : Set parameters related on report interval.

Field Definitions Unit Remark

HDR “ST4500RPT” Command type

DEV_ID 6 char. Device ID

VER “02” Protocol Version

T1 String Sec Interval for sending status report in parking mode

Range : 0 ~ 86400

If 0, report in parking will be sent only one time when

vehicle starts parking.

T2 String Sec Interval for sending status report in driving mode

Range : 0 ~ 60000