User's Manual

Doc. Title
Author
Page of Pages
ST4950
0 OPERATION MANUAL
SE PARK
4 of 9
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.01
27 NOV 2016
Suntech International Ltd.
Confidential Document
1. Introduction
The ST4950 is a asset tracker for a vehicle. It is designed to collect location data through GPS technology and
interact remotely with its server by using GPRS/HSPA technology.
In order to make the vehicle tracking system work, device should be configured and installed properly on a vehicle
whose geographical position and/or state is desired to be remotely monitored and/or controlled.
Please note that this Operation Manual is for the standard model. In case specific requirements are incorporated into
this Manual, such a manual applies only for the case.
For overall operation including installation, in addition to the ‘Device Manual’, users should refer to other documents
such as Parameter Manual, Commands Manual, Reporting Manual and so on.
2. Overview
Main function of device installed on a vehicle is to report vehicle location and status to its monitoring server at
predefined interval and to deliver command coming from the server for activating any appliance connected to the
device.
2-1. Operation modes
The device works in one of the two (2) operation modes below.
⚫ Parking mode:
✓ This mode is operational when ‘MOTION’ is OFF for duration longer than the pre-defined time
or ‘motion sensor’ is disabled.
⚫ Driving mode: