specific installation instructions

21 of 36 © 2014 Watts Water Technologies
Double-plywood over frame floor
Thin-set over slab on grade
Cement backerboard over frame floor
Insulation
(per International Residential
Code, Chapter 11)
Latex-Portland cement
mortar bond coat
Heating cable
Cement backerboard, thick-set, or
self-leveling mortar bed
Plywood subfloor
Tile/stone or laminate flooring
Joist
Insulation
(per International Residential
Code, Chapter 11)
Latex-Portland cement
mortar bond coat
Heating cable
Plywood
Plywood subfloor
Tile/stone or laminate flooring
Joist
Insulation beneath slab
(per International Residential
Code, Chapter 11)
Heating cable
Concrete slab with rewire or rebar
Thin-set or self leveling
mortar bed
Tile/stone or laminate flooring
Antifracture membrane or cork
underlayment, as needed