2016 Product Catalog Electric Floor Heating & Snow Melting Solutions • Custom TapeMat® • ShowerMat™ • TapeMat® SunTouch.
Comfort, convenience & reliability SunTouch® products are designed to add comfort, convenience and reliability to homes and commercial buildings. With SunTouch, you can choose from a full line of electric floor heating and snow melting solutions that are easy to install and use.
TapeMat®, Custom TapeMat® & ShowerMat™ ���������������������� 2 • Edged with easy-to-install double-sided tape • Open-weave mesh allows mortar to easily bond with underlying material • Can be installed under tile or stone in wet applications • Fits rooms of all shapes & sizes HeatMatrix™ Uncoupling Membrane ����������������������������������� 7 Index WarmWire® ������������������������������������������������������������������������������� 5 • Simplify WarmWire installation while protecting tile and
Open weave design for easy, 1-step mortar installation TapeMat® • Order Custom TapeMat to match your floor plan or select a standard TapeMat roll size • ShowerMat is sized to fit standard shower base sizes and includes an opening for the drain • All offer 1-step application with thinset or self-leveler • Open-weave mesh allows mortar to easily bond with underlying material • 1/8” thickness added to a typical tile installation • Simple to adjust for curves, angles, & cutouts • Double-sided tape adheres to
1. Send a complete drawing to designs@wattswater.com or call our design team toll-free at 1-888-432-8932 for assistance 2. Drawing must include the following: Complete, accurate dimensions of the area to be heated. Include all wall dimensions from start to finish around the perimeter of the room Thermostat location Dimensions & locations of any obstructions in the heated area (vents, plumbing, cabinets, steps, etc.) 3.
TapeMat® Kits A winning combination TapeMat® Kits include everything needed for a quick & simple floor warming installation. TapeMat Kits Include: • 2' wide TapeMat • SunStat® Command Thermostat • Extra Double-sided Tape • LoudMouth™ Installation Monitor • Installation Manual TapeMat Kits are available for a full range of room sizes.
The flexibility to fit any floor plan at a cost effective price WarmWire installed using CableStrap WarmWire® WarmWire installed using HeatMatrix • Wire is easily secured with CableStrap™ or HeatMatrix™ uncoupling membrane • Wire spacing can be adjusted to match rooms with different heating needs.
WarmWire® Kits Select a Kit for easy ordering WarmWire® Kits make it easy to select products to match your installation. WarmWire Kits include: • WarmWire Cable(s) • SunStat® Command Thermostat • CableStrap™ • LoudMouth® Installation Monitor • Double-sided Tape • Installation Manual *WarmWire Kits larger than 300 ft2 include a SunStat Relay C3, as well as a SunStat Command thermostat. These sizes are not packaged in full color boxes. 240 VAC WarmWire Kits 120 VAC WarmWire Kits Heated Area (ft2) 2.5" O.
For fast, easy installation of WarmWire® under tile & stone HeatMatrix™ • Simply press WarmWire into the HeatMatrix channels at the selected spacing • Protect tile and stone from cracking with a sheer stress control layer that isolates the surface from subfloor movement • Provide a barrier against surface water with durable polypropylene construction • HeatMatrix is ideal for below grade installations with deep-grooved channels that allow evaporation of moisture from below the membrane 3- and 2-shape sp
UnderFloor™ Mat Enjoy heated floors without replacing flooring. • No need to replace flooring — installs between floor joists to warm the floor above • Works under any type of flooring including nail down hardwood • Up to 15°F warmer with hard-surface flooring • Between 6°F and 10°F warmer with carpet UnderFloor™ Mats These easy-to-install mats come in two widths for common joist spacing. For the best performance, follow the installation manual recommendations for insulating between joists under the mats.
The comfort of radiant without the mechanical room SlabHeat® • Offers enough capacity for space heating (verify heat loss calculation with our technical team) • Installs over an existing slab in a “slab cap” or in a new slab • Comfortable, even heat without the drying effects of forced air • Does not promote circulation of pathogens or allergens • Silent, maintenance-free heat with no vents or duct-work • Engineered to handle the rigors of any concrete installation • Polyurethane outer jacket offers super
SunStat® Controls Complete your system with a SunStat® thermostat • Model options include energy saving schedules & touchscreens • Can operate 120 or 240 VAC systems • Built-in GFCI improves safety • Air & floor temperature sensing • Solutions for systems from 10 ft2 to 3000 ft2 SunStat Thermostats & Relays Get all the features you need to provide warmth when & where you want it! Simply select one thermostat for every area requiring individual control.
The LoudMouth monitors electric heating wire elements during the entire installation process and sounds an alarm if the heating elements are cut or damaged. Features include 9V battery power, on/off switch, indicator lights, test button & audible alarm.
Heating Accessories Joint Tape Use Joint Tape to seal the seams between rows of HeatMatrix™ in areas that are exposed to surface water. Joint Tape can also be used to span the seam at room edges where HeatMatrix and wall membranes meet. Order# 81019457 Model# 8006HJS-ST CableTrowel™ CableTrowel is recommended for applying mortar over any SunTouch electric heating system. Consider using the 3/8" wide by 1/2" deep, U-shaped, notched CableTrowel for added peace of mind.
Safe, Reliable Electric Snow Melting • • • • Reduce liability & provide safe access for visitors. Eliminate the time & physical strain of shoveling. Melt snow without salt or chemicals. Prevent potential damage caused by clearing equipment.
ProMelt® Mats Simplify electric snow melting installation • Reduce installation time with these simple-to-install mats • Mats eliminate the need to secure every row of cable • Embed in concrete, asphalt or sand • Use for snow melting & patio heating • 2' or 3' wide rolls • 120, 208, and 240 VAC model options • Multiple mats can be controlled by one contactor Simply unroll the mat and secure to rewire or rebar. ProMelt Mats offer the fastest install option for rectangular shaped areas.
ProMelt® Mats Selecting the correct size mat • Select a voltage. • Calculate the watts/ft2 required for system design. • Calculate the ft2 for each individually controlled zone. 3' Wide 2' Wide 240 VAC ProMelt Mats (50 Watts/ft2) Size (L x W) Ft2 Order# Model# Amps 8' x 2' 16 81011617 SM5024000824 3.3 12' x 2' 24 81011618 SM5024001224 5.0 16' x 2' 32 81011619 SM5024001624 6.7 20' x 2' 40 81011620 SM5024002024 8.3 24' x 2' 48 81011621 SM5024002424 10.
ProMelt® Cable Curves, stairs, custom shapes — no problem • Best option for stairs, curves & free-form areas • Easily attached to rebar or rewire with ties • Secures to existing concrete with CableStrap for patio heating applications • For use with concrete, pavers, asphalt or tile • Cable spaced at 3" OC for 50 Watts/ft2 output or 4" OC for 38 watts/ft2 • Select from 120, 208 or 240 VAC cables • Multiple cables controllable by one contactor ProMelt® Cable ProMelt Cable offers full flexibility in design.
ProMelt® Cable Cable Selection • Calculate the required watts per square foot. • Select a spacing option that will provide enough output for the expected performance of the snow melt system. • Calculate the total area to be melted for each individually controlled zone. • Determine which voltage will be used. • Select a cable long enough to cover the melting area. 208 VAC Cable 240 VAC Cable Coverage (ft2) Coverage (ft2) 3" O.C. 4" O.C. (50 W/ft2) (38 W/ft2) Length Order# Model# Amps 3" O.C. 4" O.
ProMelt® Controls Safe, reliable control for ProMelt systems • Compatible with ProMelt Cables & Mats • Automatic and manual melting options • Pole-mount, in-slab or surface-mount sensing • Control options from 30 to 200 amps per unit • 'All-in-one' control for smaller systems • 24 VAC control with connection to ContactorPro for larger systems Select the best control package for your installation. • Total the amps of the mat and cable for each zone before comparing control options.
The PM-L3 kit provides the best combination of efficiency & automated operation. Kit includes a touch screen control, surface-mounted snow/ice sensor with socket & outdoor temperature sensor. This control combination reduces the cost of snow melting by operating at the lowest possible temperature to melt snow & ice. A ContactorPro panel is required to provide power for the mats, cables & control.
ProMelt® Controls Outdoor Sensor PM-070 Replacement model for outdoor sensor included with the ProMelt control kits. Order# 81018904 Model# 300070 Slab Sensor PM-072 This weather-resistant sensor is designed for installation in conduit within a concrete slab or in mortar between pavers. Order# 81018905 Model# 300072 Snow / Ice Sensor PM-090 Detects the presence of snow & ice to enable fully automatic melting operation. Install within a Sensor Socket 091 once the surface is finished.
Permanent aluminum plaque to indicate where a snow melting system has been installed. Order# 81012381 Model# 100123 Cable Ties 6" cable ties are used to tie ProMelt Mat & Cable to rewire or rebar. 100 ties are included in a package. Order# 81012001 Model# 321400 CableStrap™ ProMelt® Accessories Snow Melting Plaque CableStrap makes it easy to install WarmWire & SlabHeat at the desired spacing. Each 25 ft roll covers approximately 40 ft2 to 50 ft2 of heated area.
SunTouch® Displays Heated Tile Display How warm does a heated tile feel? Let customers feel the difference for themselves with this countertop heated tile display. Order# 81002504 Half-Size Display Tower Smaller display gives an attractive sales focus to WarmWire & TapeMat kits. Order# 81011474 Showcase floor heating with promotional displays from SunTouch. Full-Size Display Tower Maximize TapeMat & WarmWire kit visibility with this full height, small footprint display tower.
