Brochure

C-ST-FullLine
12
Ground
solder
tubes
Heating wire
solder tubes
Jumper wires
Ground
jumper
wire
Shrink
sleeve
Heating Wire Repair Kit for SlabHeat
Before ordering this kit, consult with the factory to ensure it suits your type of repair. This
kit is used for SlabHeat systems. Kit includes materials to make one repair: 2 jumper wires,
1 ground jumper wire, 2 ground solder tubes, 4 heating wire solder tubes, and 1 shrink
sleeve. Detailed written instructions are included.
Order# 81012263 Model# 200400
Heating Accessories
Extra Long Power Leads
Contact us to order products with power leads that are longer than the standard length.
We’ll attach a custom power lead to fit your application.
Custom TapeMat, TapeMat, ShowerMat, UnderFloor Mat & WarmWire
• Standard lead length is 10'
• 120 VAC or 240 VAC
SlabHeat
• Standard lead length is 20'
• 120 VAC or 240 VAC
Consult factory to order.
Ground
solder
tubes
Heating wire
solder tubes
Jumper wires
Ground jumper wire
Heating Wire Repair Kit for Custom TapeMat, TapeMat,
UnderFloor Mat & WarmWire
Before ordering this kit consult with the factory to make sure it is suitable for the type of
repair you are making. This kit is used for Custom TapeMat, TapeMat, UnderFloor Mat &
WarmWire systems. Do not use it for ShowerMat, SlabHeat or ProMelt systems. Kit includes
materials for one repair: 2 jumper wires, 1 ground jumper wire, 2 ground solder tubes, and
4 heating wire solder tubes. Detailed written instructions are included.
Order# 81007142 Model# 200299ST
Joint Tape
Use Joint Tape to seal the seams between rows of HeatMatrix™ in areas that are exposed
to surface water. Joint Tape can also be used to span the seam at room edges where
HeatMatrix and wall membranes meet.
Order# 81019457 Model# 8006HJS-ST
CableTrowel™
CableTrowel is recommended for applying mortar over any SunTouch electric heating
system. Consider using the 3/8" wide by 1/2" deep, U-shaped, notched CableTrowel for
added peace of mind.
Order# 81007407 Model# 300400ST