Brochure

C-ST-FullLine
20
ProMelt® Controls
ProMelt Display Panel PM-DP
Connect to ProMelt PM-2C or PM-5 Snow Sensor Controls for remote adjustment and
monitoring of the system. Panel includes buttons to switch between manual on, standby
(off) and automatic operation. The ProMelt Display Panel also provides a connection for
home automation systems to enable melting operation.
Order# 81012360 Model# 300650
Slab Sensor PM-072
This weather-resistant sensor is designed for installation in conduit within a concrete slab
or in mortar between pavers.
Order# 81018905 Model# 300072
Outdoor Sensor PM-070
Replacement model for outdoor sensor included with the ProMelt control kits.
Order# 81018904 Model# 300070
Sensor Socket PM-091
This socket includes an insert that keeps the socket free of debris during concrete or
asphalt finishing. Secure conduit to cutout area to allow for installation of the Snow/Ice
Sensor 090 once the surface is finished.
Order# 81018907 Model# 300091
Snow / Ice Sensor PM-090
Detects the presence of snow & ice to enable fully automatic melting operation. Install
within a Sensor Socket 091 once the surface is finished. Comes with 65' (20m) of wire.
Order# 81018906 Model# 300090
Snow Sensor PM-095
The PM-095 enables automatic start/timed stop operation when connected to a Snow
Melting Control PM-653. This pole-mounted sensor is commonly used in systems that
require a sensor to be installed after the snow melt surface is finished.
Order# 81018908 Model# 300095