Brochure

© S unTou ch
21
ProMelt® Accessories
CableStrap™
CableStrap makes it easy to install WarmWire & SlabHeat at the desired spacing.
Each 25 ft roll covers approximately 40 ft
2
to 50 ft
2
of heated area.
Order# 81005523 Model# 321301ST
Snow Melting Plaque
Permanent aluminum plaque to indicate where a snow melting system has
been installed.
Order# 81012381 Model# 100123
Cable Ties
6" cable ties are used to tie ProMelt Mat & Cable to rewire or rebar. 100 ties are
included in a package.
Order# 81012001 Model# 321400
Ground
solder
tubes
Heating wire
solder tubes
Jumper wires
Ground
jumper
wire
Shrink
sleeve
Heating Wire Repair Kit for SlabHeat & ProMelt
Before ordering this kit, consult with the factory to ensure it suits your type of
repair. This kit is used for SlabHeat & ProMelt systems. Kit includes materials to
make one repair: jumper wires, 1 ground jumper wire, 2 ground solder tubes,
4 heating wire solder tubes, and 1 shrink sleeve. Detailed written instructions
are included.
Order# 81012263 Model# 200400
Extra Long Power Leads
Contact us to order products with power leads that are longer than the standard
length. We’ll attach a custom power lead to fit your application.
SlabHeat
• Standard lead length is 20'
• 120 VAC or 240 VAC
ProMelt Mats & Cables
• Standard lead length is 20'
• 120 VAC, 208VAC, 240 VAC & 277 VAC
Consult factory to order.
This brochure is not intended to provide full installation instructions and safety information. In order to avoid property damage
or injury, please refer to the complete installation manual and product safety information provided with the product.