Operating Instructions

1. Press the MENU/PWR button 1 time, the current channel number flashes on the LCD Screen.
2. While the channel number is flashing:
Press the button to move to a higher channel.
Press the button to move to a lower channel.
3.Press PPT(Push to talk) button to confirm the channel setting or MONI button or wait up to 10 second to confirm
Changing SUB-CHANNELS
1. Press the MENU/PWR button 2 times, the current sub-channel number(1-38CTCSS-CTCSS is a feature that allows
a group to talk to each other without hearing other users on the same channel) or 1-83DCS -DCS is a digital extension
of CTCSS.It provides 83 extra, digitally coded,squelch codes that follow after the 38CTCSS codes) flashes on the LCD
Screen.
2. While the sub-channel number is flashing:
Press the button to move to a higher sub- channel.
Press the button to move to a lower sub- channel.
3.Press PPT(Push to talk) button to confirm the channel setting or MONI button or wait up to 10 second to confirm
Your unit is simplex “one way at a time”. While you are speaking, you can not receive a transmission.
Your unit is an open‐license band. Always identify yourself when transmitting on the same channel.
Transmitting (sending speech)
The unit is continuously in the Receive mode when the unit is turned ON and not transmitting.
When a signal is received on the current channel, “RX” icon will be displayed on the LCD screen.
a.Press and hold the PTT (Push to Talk) button to transmit your voice. The transmit signal icon “TX”
will display on the LCD screen.
b. Hold the unit in a vertical position with the Mic (Microphone) 5 cm away from the mouth.
While holding the PTT button, speak into the microphone in a normal tone of voice.
c. Release the PTT button when you have finished transmitting.
For others to receive your transmission, they must be on the same channel as you.
VOX
VOX is the automatic transmitting function by inputting voice into the VOX mic without pressing the PTT
key.
Your Walkie Talkie is capable of voice activated (VOX) transmission.In VOX mode, the radio will transmit a signal only
when it is activated by your voice or other sound around you. VOX operation is not recommended,if you plan to use
your walkie talkie in a noisy or windy environment.
1. Press the MENU/PWR button 3 times, the VX “Off” icon will blink on the LCD Screen.
2. Press the / button to select the VOX sensitivity.VOX sensitivity 1, 2, 3,off can be selected on this unit.
3. In the VOX mode, the VX icon will be displayed.
4.Press PPT(Push to talk) button to confirm the channel setting or MONI button or wait up to 10 second to confirm
NOTE: On VOX mode, user can speak with their voice through the microphone to activate transmitting mode
automatically.
Melody Call Tone Selection
This function will let user to select the desired Melody Call Tone.
1. Press the MENU/PWR button 4 times, to select Melody Call tone modes.