Operating Instructions

2. Press the or button to select the desired Melody Call tone.
3.Press PPT(Push to talk) button to confirm the channel setting or MONI button or wait up to 10 second to confirm
NOTE: Melody Call Tones is available up to 10 melody tones.
TOT
time out timer means the unit will automatically stop transmit after 30sec or 60 sec continuously transmit.
Press Menu button 5 times,screen will display 60 TO,press Up or Down button can choose 60 or 30 seconds or
OF.Default setting is 60 seconds,press the PTT button to confirm changes.
Roger beep on/off
Press the MENU/PWR button 6 times,screen will display OF, character OF keep flashing, by press UP or Down
button to choose ,ON or OF, press PTT button to confirm setting, this is a tone which is automatically transmitted
whenever the PTT button is released.Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is
transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.Press PPT(Push to talk) button to confirm the channel
setting.or MONI button or wait up to 10 second to confirm.default setting is on when power on
Key Beep
Press the MENU/PWR button 7 times,screen will display OF, character OF keep flashing, by press UP or Down
button to choose ,ON or OF, Press PPT(Push to talk) button to confirm the channel setting.or MONI button or wait up
to 10 second to confirm, default setting is on when power on
DCM
Press the MENU/PWR button 8 times,screen will display OF, character OF keep flashing, by press UP or Down
button to choose ,ON or OF, press the MENU/PWR to set DCM,in this model the LCD will display DCM on the top and
When DCM function is active, priority channel is watched every 1.5 seconds.,default setting is off when power
on.Press PPT(Push to talk) button to confirm the channel setting.or MONI button or wait up to 10 second to confirm
NOAA Weather radio
Press button 3 seconds to active NOAA Weather radio ,RX icon will display and weather icon will flash ,press
MENU/PWR button once ,the weather channel is flashing ,use or button to select the desired weather
channel .The weather channel,total have 10 channels for selecting ,press PTT button for confirm the setting .Press
button 3 seconds again to deactivate NOAA Weather radio.
NOAA Weather ALERT
Press button 3 seconds to active NOAA Weather radio ,press MENU/PWR button Twice,AL OF will appear on
the LCD screen, use or button to select AL OFF or ON ,when the AL is on ,when have emergency singal
come,it will alarm 20 seconds ,press any button to listen the messeage,
SYMPTOM
SOLUTION
No power.
The battery may be weak. Check battery. Ensure that the battery are installed properly.
Replace the old battery with new battery AAA*4PCS
Reception is
weak.
Press the button to increase VOLUME. The receiving signal may be weak and/or
out of range.