User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
37 Revision 1.0.1
Table 1 AU Front Panel Interfaces
SN
Interface Name
Description
1
AU1
Connects Slave AU1 via optical fiber
2
AU2
Connects Slave AU2 via optical fiber
3
OP1/AU
For Master AU: connects EU/RU via optical fiber
For Slave AU: connects Master AU via optical fiber
4
OP2
Connects EU/RU via optical fiber
5
OP3
Connects EU/RU via optical fiber
6
OP4
Connects EU/RU via optical fiber
7
OP5
Connects EU/RU via optical fiber
8
OP6
Connects EU/RU via optical fiber
9
CONSOLE
Connects OMC or local PC through CAT-5 for local and remote monitoring
10
AP
Connects WLAN network adapters for monitoring device through Wi-Fi
11
STATUS
Indicates device operating status
12
DEBUG
Connects local debugging PC through USB connection
13
ALARM I/O
Connects external environment alarm interface for environment monitoring
3.3. AU Back Panel
Figure 3-3 shows a schematic of the back panel of the AU and Table 2 lists the interfaces and their functionality.
Figure 3-3 Back Panel of the AU
Table 2 AU-Back Panel Interfaces
SN
Interface Name
Description
14
Channel 4 Duplexer Interface
BTS signal input via 50Ohm coaxial cable (SMA Female)
15
Channel 3 Duplexer Interface
BTS signal input via 50Ohm coaxial cable (SMA Female)
16
Channel 2 Duplexer Interface
BTS signal input via 50Ohm coaxial cable (SMA Female)
17
Channel 1 Duplexer Interface
BTS signal input via 50Ohm coaxial cable (SMA Female)
18
Modem Interface /Reserved
Reserved if no modem
19
Electric Power Line Interface
/
20
Grounding
/