User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
53 Revision 1.0.1
Figure 5-2 Front Panel of the RU
Table 33 RU Front Panel Interfaces
SN
Interface Name
Description
1
CH2
PA 2 Module Interface, connects service antenna via 4.3-10 female connector
2
CH1
PA 1 Module Interface, connects service antenna via 4.3-10 female Connector
3
Modem Interface /Reserved
Reserved if no modem
4
Slave OP
Connects EU or RU at the next higher level via optical fiber
5
Slave
Indicates Slave OP port operating status
6
MASTER OP
Connects RU at the next lower level via optical fiber
7
Master
Indicates Master OP port operating status
8
RUN
Indicates device operating status
9
DEBUG
Connection for local PC through CAT-5 for local monitoring
10
GE
LAN signals or S1 signals output via CAT-5(STP)
11
PWR
Electrical Power Line Interface
5.3. Indicator Description
Refer to Section 3.5 for details.
5.4. OMT Parameters, Alarms and Commands for the RU
See Section 2.3, OMT Display, for information on how to use the WebOMT interface to view and change parameters