User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
78 Revision 1.0.1
Figure 7-3 NMS Setup
7.2. Channel Properties Configuration
According to the different base station operating frequency bands for each operator, select the passive RF modules
for the AU and active RF modules for the RU with the corresponding frequency band and set the channel properties in
the WebOMT of the Master AU. The limits of the uplink and downlink operating frequency bands correspond to the
effective RF range of the selected RF modules.
To set the channel properties (see Figure 7-4):
1. In the WebOMT, select the Engineering tab.
2. Select the Characteristics sub-tab on the Engineering page.