Operation Manual

9
(2) Please press the key, and test whether the device can be turned
on or not. If the code is correct, jump to Step (4) to save data and
exit, or go on next step.
(3) Press the key one by one to take the previous code and repeat
step (2) process until you find the correct one that can turn the TV
on.
(4) Make sure you press “OK” to save the setup, and go back to the
operation page.
1.2 Input Code
(1) Open the code list and look for the brand
of your home device. In general, a brand
may have several sets of codes, and you
have to confirm the actual using code by
going through the list.
(2) There are four numbers for each code, and when you input a code, the
SRC-3200 will automatically check whether or not the number is
entered correctly.
(3) You will see an “OK” message at the top of the screen if you have
entered the correct number, or else you will see an “ERROR” message
instead. Enter the correct code again, if “ERROR” appears.