Operation Manual

12
(2) When the key starts flashing,
please press the corresponding learnt
key from the original remote in order to
transmit its IR code to SRC-3200.
(3) As long as the flashing key has
learnt the IR code, the auto-guide system
will assign next key automatically. Please
repeat Step (2) process until all desired
soft keys has been learnt.
(4) As to hard keys (rubber keys), because
there is no auto-guide system to support,
so you should press every hard key and
assign it manually (no flashing sign on
the screen at the moment). After that,
please press the corresponding learnt
key from the original remote in order to
transmit its IR code to SRC-3200 until all
desired hard keys has been learnt.
(5) Press “EXIT” if you want to quit the
learning function and return to the setup
page.